EPC9068:開發板

EPC9068 – High Frequency Development Board with Synchronous Bootstrap Gate Drive

The EPC9068 development board that can be configured as either a buck converter or a ZVS class-D amplifier. The synchronous bootstrap gate drive enables high efficiency and high frequency operation, up to 15 MHz.

The EPC9068 is a 100 V maximum device voltage, 2.7 A maximum output current, half bridge with onboard gate drives, featuring the EPC8010 enhancement mode (eGaN®) field effect transistor (FET). The gate driver has been configured with a synchronous FET bootstrap circuit featuring the EPC2038 eGaN FET that eliminates high side device losses induced by the reverse recovery losses of the internal bootstrap diode of the gate driver.

產品狀況:停產產品
組裝好的參考設計是非賣品,僅用作測試和驗證性能。
如需進一步協助,可聯繫氮化鎵專家

* Assumes inductive load, maximum current depends on die temperature – actual maximum current will be subject to switching frequency, bus voltage and thermal cooling.
# Limited by time needed to ‘refresh’ high side bootstrap supply voltage.