PCIM 2020 Digital Days

Play video above for a message from EPC's CEO, Alex Lidow. Then tap or click on pedestals below for application virtual seminars.

PCIM Europe 2020 Digital Days
Date: July 7 - 8, 2020
Click Below for a Chance to Win an Echo Show


EPC PCIM 2020

Join EPC at the upcoming PCIM Europe 2020 Digital Days on July 7-8 to see how the superior performance of eGaN® FETs and ICs is transforming power delivery for computing, communications, robotics, and transportation.

What EPC will be talking about at PCIM:

  • Panel Session, Power GaN: Past – Present – Future
    Presenter: Alex Lidow, Ph.D.
    Schedule: July 7th, 12:00 pm – 12:30 pm
  • Panel Session, Power GaN: GaN – Devices the Game Changer
    Speaker: Alex Lidow, Ph.D.
    Schedule: July 8th, 12:45 pm – 1:30 pm
  • A Low Voltage BLDC Motor Drive Inverter Using a Monolithic eGaN IC Power Stage
    Session: Stream 1:Si and GaN Integration
    Date & Time: Wednesday, July 8th @ 11:05 am

    BLDC motors are popular choices and are finding increasing application in robotics and drones. Such applications have special requirements such as lightweight, small size, low torque ripple, and precision control.

    To address these needs, inverters powering the motors need to operate at higher frequency but require additional filtering to prevent excessive losses, EMI generation, and excess mechanical wear related to high frequency common mode and induced current flow.

    GaN FETs and IC’s offer the ability to operate at much higher frequencies in hard-switching topologies without incurring significant losses.

  • GaN FET-Based Ultra-Thin DC-DC Step-Down Converter

    As computers, displays, smart phones and other consumer electronics systems become thinner and more powerful over the past decade, there is increasing demand for addressing the challenge of thinner solutions while extracting more power out of this limited space.

    This paper will examine the feasibility of adopting various non-isolated DC-DC step-down topologies for an ultra-thin 48 V-to-20 V power solution. Two topologies, namely the three-level and the two-phase buck converters, are selected to design an ultra-thin 48 V-to-20 V, 250 W converter. GaN FETs are used to reduce the converter size and improve efficiency.

  • 300 W 48V-12V 1/16th Brick DC-DC Converter Using GaN FETs

    Brick DC-DC converters are standardized by the Distributed-power Open Standards Alliance (DOSA). They have promoted better compatibility and flexibility in power distribution systems for data center, telecommunication and automotive industries.

    These brick converters are commonly used to convert a nominal 48 V to a nominal 12 V distribution bus among other output voltages. The main trend has been towards higher power density given the form factor is fixed.

    This paper will introduce the design of a non-isolated 1/16th brick DC-DC converter using GaN FETs for 48 V-to-12 V application, with a maximum output power of 300 W and power density of 730 W/in3.

To meet virtually with an EPC team member after PCIM 2020 Digital Days request a meeting online