News

Sign up today to get the latest news and updates from EPC on new product announcements, applications work, and much more. Sign up for EPC email updates or text "EPC" to 22828.

Efficient Power Conversion (EPC) and BrightLoop Converters Combine Design Expertise to Produce Smaller, Lighter Converters for Performance eMotorsport Vehicles

Efficient Power Conversion (EPC) and BrightLoop Converters Combine Design Expertise to Produce Smaller, Lighter Converters for Performance eMotorsport Vehicles

EL SEGUNDO, Calif. — December 2020 — BrightLoop Converters has greatly reduced the size, cost and improved reliability of its latest BB SP DC-DC buck converters thanks to Efficient Power Conversion Corporation’s (EPC) EPC2029 enhancement-mode gallium nitride (eGaN®) FET transistors. By switching from silicon (Si) transistors to gallium nitride (GaN), BrightLoop was able to increase the switching frequency of their design from 200 kHz to 600 kHz, while keeping the same efficiency. This design change increased the power density of the solution by a factor of approximately two and this resulted in lower cost by enabling the implementation of a smaller enclosure.

EPC’s EPC2029 is an 80 V, 48 A eGaN® FET featuring a 1 mm ball pitch. The wider pitch allows for placement of additional and larger vias under the device to enable high current carrying capability despite the extremely small 2.6 mm x 4.6 mm footprint.

Read more
Categories: Press Releases

EPC Launches 300 W Bidirectional 16th Brick for High-Density Computing and Data Centers Powered by Gallium Nitride (GaN) Integrated Power Stage

EPC Launches 300 W Bidirectional 16th Brick for High-Density Computing and Data Centers Powered by Gallium Nitride (GaN) Integrated Power Stage

The EPC2152 ePower™ Stage enables higher performance and smaller solution size for high power density, low-cost DC-DC conversion demonstrated in the EPC9151 power module.

EL SEGUNDO, Calif.— December, 2020 — EPC announces the availability of the EPC9151, a 300 W bidirectional DC-DC voltage regulator in the in the very small 16th brick format which is just 33 mm x 22.9 mm (1.3 x 0.9 in). The EPC9151 power module features Microchip’s dsPIC33CK digital signal controller (DSC) with the EPC2152 ePower™ Stage integrated circuit from EPC to achieve greater than 95% efficiency in a 300 W 48 V to/from 12 V converter design.  Additional phases can be added to this scalable 2-phase design to further increase power.

Read more
Categories: Press Releases

EPC and Microchip Develop 300 W 16th Brick, 48 V – 12 V DC-DC Converter Demonstration Board for High-Density Computing and Data Centers

EPC and Microchip Develop 300 W 16th Brick, 48 V – 12 V DC-DC Converter Demonstration Board for High-Density Computing and Data Centers

The combination of Microchip Technology’s digital signal controllers with ultra-efficient eGaN® FETs from EPC (Efficient Power Conversion) enable best-in-class power density of 730 W/in3 for high efficiency, low cost DC-DC Conversion.

EL SEGUNDO, Calif.— July, 2020 — EPC announces the availability of the EPC9143, a 300 W DC-DC voltage regulator in 16th brick size. The EPC9143 power module integrates Microchip’s dsPIC33CK digital signal controller (DSC) with the latest generation EPC2053 eGaN FETs from EPC to achieve 96% efficiency in a 48 V input to 12 V output conversion at 25 A.  The switching frequency of 500 kHz enables the 300 W in the very small 16th brick format which is just 33 mm x 22.9 mm (1.3 x 0.9 in). Additional phases can be added to this scalable 2-phase design to further increase power. The flexibility of the Microchip digital controllers allows the input voltage to be adjusted from 8 V – 72 V and the output voltage from 3.3 V – 25 V.

Read more
Categories: Press Releases
RSS