News

Sign up today to get the latest news and updates from EPC on new product announcements, applications work, and much more. Sign up for EPC email updates or text "EPC" to 22828.

EPC Increases Benchmark Performance Versus Silicon MOSFETs with Latest 100 V eGaN FET Family

EPC Increases Benchmark Performance Versus Silicon MOSFETs with Latest 100 V eGaN FET Family

These new generation 100 V eGaN® FETs are ideal for 48-VOUT synchronous rectification, class-D audio, infotainment, and lidar.

EL SEGUNDO, Calif.— September, 2020 — EPC, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, advances the performance capability while lowering the cost of off-the-shelf gallium nitride transistors with the introduction of EPC2218 and EPC2204 100 V eGaN FETs.  The applications for these leading-edge devices include synchronous rectification, class-D audio, infotainment systems, DC-DC converters (hard-switched and resonant), and lidar for autonomous cars, robotics, and drones.

Read more
Categories: Press Releases

Testing Gallium Nitride Devices to Failure Under Extreme Voltage and Current Stress

Testing Gallium Nitride Devices to Failure Under Extreme Voltage and Current Stress

Standard qualification testing for semiconductors typically involves stressing devices at-or-near the limits specified in their data sheets for a prolonged period of time, or for a certain number of cycles, with the goal of demonstrating zero failures. By testing parts to the point of failure, an understanding of the amount of margin beyond the data sheet limits can be developed, but more importantly, an understanding of the intrinsic failure mechanisms of the semiconductor can be found.

Bodo’s Power Systems
September, 2020
Read article Read more

Categories: Articles

GaN HEMTs Outperform MOSFETs in Key Growth Applications

GaN HEMTs Outperform MOSFETs in Key Growth Applications

Silicon power MOSFETs have not kept pace with the evolutionary changes in the power electronics industry, where factors such as efficiency, power density, and smaller form factors are the main demands of the community. Silicon MOSFETs have reached their theoretical limits for power electronics, and with board space at a premium, power system designers need alternatives. Gallium nitride (GaN) is a high-electron-mobility transistor (HEMT) semiconductor that is adding real value in emerging applications.

EETimes
August, 2020
Read article

Read more
Categories: Articles

EPC Doubles the Performance of its 200 V eGaN FET Family

EPC Doubles the Performance of its 200 V eGaN FET Family

These new generation 200 V eGaN® FETs are ideal for 48 VOUT synchronous rectification, class-D audio, solar microinverters and optimizers, and multilevel, high-voltage AC/DC converters

EL SEGUNDO, Calif.— August, 2020 — EPC, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, advances the performance capability while lowering the cost of off-the-shelf gallium nitride transistors with the introduction of the EPC2215 and EPC2207 200 V eGaN FETs.  The applications for these leading-edge devices include class D audio, synchronous rectification, solar MPPTs (maximum power point tracker), DC-DC converters (hard-switched and resonant), and multilevel high voltage converters.

Read more
Categories: Press Releases

Podcast: Yes, We GaN: Gallium Nitride and Its Role in Power ICs

Podcast: Yes, We GaN: Gallium Nitride and Its Role in Power ICs

In this inaugural episode, guests are Alex Lidow, CEO of Efficient Power Conversion Corp., and Dinesh Ramanathan, co-CEO of NexGen Power Systems. EPC and NexGen both have expertise with gallium nitride technology and GaN power devices. EETimes speaks with both about the technology and about the market for GaN power devices.

EETimes
August, 2020
Listen to podcast

Read more
Categories: Articles

GaN Reliability Testing Beyond AEC Proves Robustness for Automotive Lidar Applications

GaN Reliability Testing Beyond AEC Proves Robustness for Automotive Lidar Applications

Gallium nitride (GaN) power devices have been in volume production since March 2010 and have established a remarkable field-reliability record. An automotive application using GaN power devices in high volume is lidar (light detection and ranging) for autonomous vehicles. Lidar technology provides information about a vehicle’s surroundings, thus requiring high accuracy and reliability to ensure safety and performance. This article will discuss a novel testing mechanism developed by Efficient Power Conversion (EPC) to test eGaN devices beyond the qualification requirements of the Automotive Electronics Council (AEC) for the specific use case of lidar.

eeNews Europe
July 30, 2020
Read article

Read more
Categories: Articles

GaN eases Silicon out

GaN eases Silicon out

Just like life’s reality, when the aged leaves the center stage for the younger ones, Silicon is taking the bow. The advent and adoption of Gallium Nitride (GaN) have succeeded in gradually easing out the old reliable Silicon. For over four decades, power management efficiency and cost have improved steadily as innovations in power MOSFET structures, technology, and circuit topologies have kept pace with the growing need for electrical power. In the new millennium, however, the rate of improvement has slowed dramatically as the silicon power MOSFET approaches its theoretical bounds. At the same time, the new material, GaN is steadily progressing on its journey toward a theoretical performance boundary that is 6,000 times better than the aging silicon MOSFET and 300 times better than the best GaN products on the market today.

EEWeb
July 16, 2020
Read article

Read more
Categories: Articles

EPC and Microchip Develop 300 W 16th Brick, 48 V – 12 V DC-DC Converter Demonstration Board for High-Density Computing and Data Centers

EPC and Microchip Develop 300 W 16th Brick, 48 V – 12 V DC-DC Converter Demonstration Board for High-Density Computing and Data Centers

The combination of Microchip Technology’s digital signal controllers with ultra-efficient eGaN® FETs from EPC (Efficient Power Conversion) enable best-in-class power density of 730 W/in3 for high efficiency, low cost DC-DC Conversion.

EL SEGUNDO, Calif.— July, 2020 — EPC announces the availability of the EPC9143, a 300 W DC-DC voltage regulator in 16th brick size. The EPC9143 power module integrates Microchip’s dsPIC33CK digital signal controller (DSC) with the latest generation EPC2053 eGaN FETs from EPC to achieve 96% efficiency in a 48 V input to 12 V output conversion at 25 A.  The switching frequency of 500 kHz enables the 300 W in the very small 16th brick format which is just 33 mm x 22.9 mm (1.3 x 0.9 in). Additional phases can be added to this scalable 2-phase design to further increase power. The flexibility of the Microchip digital controllers allows the input voltage to be adjusted from 8 V – 72 V and the output voltage from 3.3 V – 25 V.

Read more
Categories: Press Releases

Class D audio, Gallium-Nitride versus Silicon – Virtual Roundtable (part 2 of 2)

Class D audio, Gallium-Nitride versus Silicon – Virtual Roundtable (part 2 of 2)

In this second part of EEWorld’s “virtual roundtable” discussion on Class D audio, our panelists delve into the impact that the emergence of gallium-nitride (GaN) is having on Class D designs: Where are silicon devices still dominant? What are the performance benefits of using GaN in Class D amplifiers? And what are the anticipated future trends of GaN versus Silicon in Class D amplifiers? Joining us for this virtual roundtable are Joshua LeMaire (JL), Audio Systems Architect at Analog Devices; Steve Colino (SC), Vice President Strategic Technical Sales with Efficient Power Conversion; and Jens Tybo Jensen (JTJ), Head of Application Engineering for Class D Audio at Infineon Technologies.

EEWorld Online
July, 2020
Read article

Read more
Categories: Articles

GaN Transistor for Space Missions

GaN Transistor for Space Missions

GaN power transistors are an ideal choice for power and RF applications to support extreme space missions. Through its new eGaN® solutions, EPC Space guarantees radiation hardness performance and SEE (single-event effects) immunity, with devices that are specifically designed for critical applications in commercial satellite space. These devices have exceptionally high electron mobility and a low-temperature coefficient with very low RDS(on) values.

EETimes
July, 2020
Read article

Read more
Categories: Articles

Radiation Performance of Enhancement-Mode Gallium Nitride Power Devices

Radiation Performance of Enhancement-Mode Gallium Nitride Power Devices

Enhancement-mode gallium nitride (eGaN®) technology enables a new generation of power converters in space operating at higher frequencies, higher efficiencies, and greater power densities than ever achievable before. eGaN devices also exhibit superior radiation tolerance compared with silicon MOSFETs.

Bodo’s Power Systems
June, 2020
Read article

Read more
Categories: Articles

EPC to Showcase High Power Density eGaN FETs and ePower Stage IC in Customer Applications at PCIM Europe 2020 Digital Days

EPC to Showcase High Power Density eGaN FETs and ePower Stage IC in Customer Applications at PCIM Europe 2020 Digital Days

Efficient Power Conversion (EPC) will showcase the company’s latest ePower™ Stage IC family of products showing how GaN technology’s superior performance is transforming power delivery for computing, communications, robotics, and transportation at the PCIM Europe 2020 Digital Days.

EL SEGUNDO, Calif.— June 2020 — The EPC team will be delivering three technical presentations and participating in two panel discussions on gallium nitride (GaN) technology and applications at the upcoming PCIM Europe 2020 Digital Days, July 7 – 8. In addition, the company will participate in the event’s virtual exhibit, showing its latest eGaN FETs and ICs in customers’ end products that are rapidly adopting eGaN technology.

Read more
Categories: Press Releases

Improving Reliability For GaN And SiC

Improving Reliability For GaN And SiC

Why these chips are gaining ground, and what still needs to be addressed. Suppliers of gallium nitride (GaN) and silicon carbide (SiC) power devices are rolling out the next wave of products with some new and impressive specs. But before these devices are incorporated in systems, they must prove to be reliable.

Semiconductor Engineering
June, 2020
Read article

Read more
Categories: Articles

EPC and VPT, Inc. Announce Joint Venture – EPC Space – Targeting the Radiation Hardened Power Electronics Market for Mission Critical Applications

EPC and VPT, Inc. Announce Joint Venture – EPC Space – Targeting the Radiation Hardened Power Electronics Market for Mission Critical Applications

EPC Space, a joint venture company, will provide advanced, high-reliability, gallium nitride (GaN) power conversion solutions for critical spaceborne and other high reliability environments.

EL SEGUNDO, CA and BLACKSBURG, VA – June 2020 – Efficient Power Conversion (EPC) Corporation and VPT, Inc., A HEICO company (NYSE:HEI.A) (NYSE:HEI)  announce the establishment of EPC Space LLC, a joint venture focused on designing and manufacturing radiation hardened (Rad Hard) GaN-on-silicon transistors and ICs packaged, tested, and qualified for satellite and high-reliability applications.

Read more
Categories: Press Releases

Silicon Is Dead…and Discrete Power Devices Are Dying

Silicon Is Dead…and Discrete Power Devices Are Dying

For over four decades, power management efficiency and cost have improved steadily as innovations in power MOSFET structures, technology, and circuit topologies have kept pace with the growing need for electrical power. In the new millennium, however, the rate of improvement has slowed dramatically as the silicon power MOSFET approaches its theoretical bounds. At the same time, a new material, gallium nitride (GaN) is steadily progressing on its journey toward a theoretical performance boundary that is 6,000 times better than the aging silicon MOSFET and 300 times better than the best GaN products on the market today.

EETimes
June, 2020
Read article

Read more
Categories: Articles

Designing An Ultra-Thin Stepdown Converter: Multiphase Vs. Multilevel

Designing An Ultra-Thin Stepdown Converter: Multiphase Vs. Multilevel

Over the past decade computers, displays, smart phones and other consumer electronics systems have become thinner while also becoming more powerful. As a result, the market continues to increase its demand for thinner power supply solutions with greater power density. This article examines the feasibility of adopting various non-isolated dc-dc stepdown topologies for an ultra-thin 48-V to 20-V, 250-W power solution.

How2Power
May, 2020
Read article

Read more
Categories: Articles

Integrated GaN Power Stage for eMobility

Integrated GaN Power Stage for eMobility

Brushless DC (BLDC) motors are a popular choice and are finding increasing application in robotics, drones, electric bicycles, and electric scooters. All these applications are particularly sensitive to size, weight, cost, and efficiency. A monolithically integrated GaN power stage is demonstrated powering a 400 W capable BLDC motor with low switching losses and significant savings in size and weight.

Power Electronics Europe
May, 2020
Read article

Read more
Categories: Articles

GaN Integrated Power Stage – Redefining Power Conversion

GaN Integrated Power Stage –  Redefining Power Conversion

Beyond just performance and cost improvement, the most significant opportunity for GaN technology to impact the power conversion market comes from its intrinsic ability to integrate multiple devices on the same substrate. GaN technology, as opposed to standard silicon IC technology, allows designers to implement monolithic power systems on a single chip in a more straightforward and cost-effective way.

Bodo’s Power Systems
May, 2020
Read article

Read more
Categories: Articles
RSS
12345678910 Last