Key Takeaways

  • GaN technology is compatible with low-cost silicon integrated circuit infrastructure already in place, allowing GaN technology to leverage billions of dollars of underutilized semiconductor supply chain.
  • eGaN FETs eliminate one standard element in the semiconductor supply chain – the external plastic package. On average, the plastic package accounts for approximately 50% of the overall cost of a silicon MOSFET.
  • Since the majority of the supply chain is in place and is underutilized, eGaN FET production can expand rapidly with very limited investment in new capital.
  • Partly due to leveraging the underutilized existing semiconductor supply chain, over the next three years we expect the production costs of GaN transistors to go below the costs of silicon power MOSFETs.

The eGaN® FET Supply Chain

In the past issues of Fast Just Got Faster, we have presented a path from the basic properties of a gallium nitride crystal, to how this material, when transformed into an eGaN® FET, can enable some amazing new end-use applications, such as wireless power transfer, LiDAR, and envelope tracking. Extending beyond the power transistor market, eGaN FETs have the potential to infiltrate the higher value markets for power integrated circuits and analog IC’s. These markets, added to the power transistor market, total over $40B annually.

We now turn our attention to the supply chain needed to support the growth of eGaN technology. Hundreds of billions of dollars have been spent to make the silicon technology supply chain incredibly efficient. How can GaN transistors compete against this huge installed base of silicon-based production?

The Silicon MOSFET Supply Chain

typical power MOSFET supply chain

Figure 1: The typical power MOSFET supply chain. Each block is performed in a different facility, often on different continents.

fabrication clean room

Figure 2: Image from the interior of a wafer fabrication clean room.

packaging clean room

Figure 3: Image from the interior of a packaging clean room. About 50% of the cost to manufacture a power MOSFET is in the packaging step.

Today’s power MOSFET follows a supply chain model as shown in figure 1. The starting point is the growth of a silicon crystal, followed by the growth of a thin layer of epitaxial silicon. These wafers are then processed through many tens, or even hundreds, of steps to produce a completed wafer with hundreds (or thousands) of individual transistors. Figure 2 is an image from the interior of a wafer fabrication facility showing the clean room and equipment common to semiconductor manufacturing. New wafer fabrication and test facilities like this cost several billions of dollars each to build and equip.

Testing is the next step where bad devices are identified to be removed at a later step. Following testing, the finished wafers are sent to a different facility to be saw-cut (singulated) into individual devices. Once singulated, the good devices are assembled into plastic packages, tested again to identify further rejects, packed and shipped to customers. Figure 3 is an image from the interior of an assembly facility showing the clean room and assembly equipment. On average, assembling MOSFETs into plastic packages account for about 50% of the total product cost.

The eGaN FET Supply Chain

The current eGaN FET supply chain is shown in figure 4. Like the power MOSFET, the starting point is the growth of a silicon crystal. Instead of an epitaxial silicon layer, an epitaxial structure of aluminum nitride, aluminum gallium nitride, and gallium nitride is grown (This is called a hetero epitaxial structure). This growth is the only step that requires equipment specialized for GaN transistors. Both the epitaxial growth and the wafer fabrication today take place inside a commercial silicon foundry originally built in the late 1980’s to manufacture DRAMs. This kind of trailing-edge capacity is widely available in the industry, and is perfectly adequate for producing state-of-the-art eGaN FETs because this technology is not as driven by smaller geometries. eGaN FETs also require far fewer process steps in the wafer fabrication process compared with advanced power MOSFETs.


current eGaN FET supply chain

Figure 4: The current eGaN FET supply chain. Each block is performed in a different facility. The last three steps are all in the same city in Taiwan.

completed eGaN FET wafer

Figure 5: Completed eGaN FET wafer. There are about 10,000 transistors on this wafer. The next step is singulation, where the wafer is saw-cut and the individual transistors that passed testing are separated from failed devices.

future eGaN FET supply chain

Figure 6: The future eGaN FET supply chain. All steps following silicon crystal growth are expected to be performed in the same facility.

As with MOSFETs, a testing step, whereby faulty die are identified for future segregation, follows wafer fabrication. Unlike the MOSFET, eGaN FETs, while still in wafer form, have a protective plastic coating applied and solderable bumps screen printed to form the electrical contacts to the outside world. This relatively low-cost sequence of steps for producing an eGaN FET replaces the costly and bulky plastic package needed for the silicon MOSFET.

At this point, the eGaN FET wafer looks like the one shown in figure 5. There are about 10,000 transistors on this wafer. A comparable silicon MOSFET wafer would have only 2,000 to 3,000 devices. Singulation, packing and shipping are the final steps.

In the next couple of years, the bump, singulation, test, pack and ship steps will be integrated into the wafer fabrication facility as illustrated in figure 6. This consolidation will save cost and reduce the cycle time in the supply chain. It also improves flexibility and responsiveness to market fluctuations and reduces the amount of working capital needed to expand.

Capital Investment and Product Cost

With the exception of the machines needed to grow the epitaxial GaN layers on top of silicon, all of the machinery needed to manufacture eGaN FETs is standard, trailing-edge equipment used to manufacture billions of silicon integrated circuits today. History shows that trailing-edge silicon wafer capacity is chronically abundant. The use of highly available and very mature capacity greatly reduces the amount of capital and the risk required to produce eGaN FETs in high volume.


comparison of eGaN FET and power MOSFETs

Figure 7: Cost comparison between eGaN FETs and power MOSFETs. In 2016, we expect eGaN FETs to cost less to produce than a power MOSFET with similar ratings.

How does this all add up? The cost comparison between a power MOSFET and an eGaN FET with similar voltage and on-resistance specifications (as discussed in volume 2 of Fast Just Got Faster) is illustrated in figure 7. With the introduction of next-generation epi growth equipment, as well as the benefits of scale, eGaN FETs should be less costly to produce than the venerable power MOSFET. Couple this reduced production cost with the relatively low cost and risk needed to rapidly expand the supply chain, and the thesis that the eGaN FET will dethrone the power MOSFET as the dominant power conversion transistor becomes quite persuasive.


In the next issue

We will look at the developing ecosystem of driver ICs, simulation software, training programs, and literature and how they attack one of the four main requirements for a displacement technology to succeed – “make the product easy to use!”