客户可以在我们的网页 注册 ,定期收取最新消息包括全新产品发布、应用文章及更多其它资讯。如果你错过了已发布的资料,你可浏览以下的文档。
基于氮化镓器件的EPC9186逆变器参考设计增强了高功率应用的电机系统性能、精度、扭矩和可实现更长的续航里程。
宜普电源转换公司(EPC)新推EPC9186,这是一款采用EPC2302 eGaN®FET的三相BLDC电机驱动逆变器。EPC9186支持14 V~ 80 V的宽输入直流电压。大功率EPC9186支持电动滑板车、小型电动汽车、农业机械、叉车和大功率无人机等应用。
阅读全文
Superior characteristics of eGaN® FETs and integrated circuits, such as low output capacitance, low input capacitance, low parasitic inductances, and small size make them ideal for increasing efficiency in highly resonant, AirFuel™ wireless power transfer systems.
EL SEGUNDO, Calif.— May 2018 — Efficient Power Conversion Corporation (EPC) today announces the availability of a complete class 4 wireless power kit, the EPC9129. The system can transmit up to 33 W while operating at 6.78 MHz (the lowest ISM band). The kit comes complete with two receivers, each with a regulated output − one capable of 5 W capable and a second capable of delivering 27 W at 19 V.
阅读全文
Superior characteristics of eGaN® FETs and ICs, such as low output capacitance, low input capacitance, low parasitic inductances, and small size used in these demonstration kits show that GaN FETs and ICs are ideal for increasing efficiency in highly resonant, AirFuel™ Alliance compatible wireless power transfer systems.
EL SEGUNDO, Calif.—October 2017 — Efficient Power Conversion Corporation (EPC) today announces the availability of two new demonstration kits -- the EPC9127, a complete wireless power kit including a 10 W, class 2 amplifier, category 3 receiver device and the EPC9128, consisting of a 16 W, class 3 amplifier and two receiver devices (categories 3 and 4). These systems, coupled with previously announced EPC9120, 33 W class 4 and the EPC9121 multi-mode kit capable of operating to either an AirFuel Class 2 standard with a category 3 device or a Qi (A6)/PMA standard with a compatible receiving device provide a full range of wireless power demonstration kits to allow for complete, wide-spread implementation.
阅读全文
具备卓越性能的氮化镓场效应晶体管(eGaN®FET),例如低输出电容、低输入电容、低寄生电感及小型化,成为高度共振式并与AirFuel™标准兼容的无线充电系统的理想器件,可提高效率。
宜普电源转换公司(EPC)宣布推出与AirFuel联盟第四级别(Class 4)规格兼容的无线充电套件(EPC9120)。该系统可对应用提供高达33 W功率而同时工作在6.78 MHz频率(最低ISM频段),旨在于高效无线充电应用中,简化对所采用的氮化镓场效应晶体管(eGaN FET)进行评估。EPC9120采用具备高频开关性能的EPC氮化镓晶体管,使得无线充电系统可以在不同的工作条件下,实现80%至90%的效率。
阅读全文
具备优越特性的eGaN® FET与集成电路可以实现的低成本解决方案是在发射端采用单个功率放大器,而在接收端无论是采用什么标准,也可以实现无线充电。
宜普电源转换公司(EPC)宣布推出支持多模式的无线充电演示套件(EPC9121),从而简化对基于eGaN® FET与集成电路的高效、多模式无线充电系统进行评估的过程,该系统支持采用任何标准的接收器。
阅读全文
全新EPC2107及EPC2108 eGaN®功率集成电路包含单片半桥式器件及集成式自举功能,专为符合无线充电联盟(A4WP)第二及第三级规范的解决方案而设。此外,为了让客户容易对氮化镓元件进行评估,我们也提供开发板及包含发射器及接收器的无线电源传送解决方案。
宜普电源转换公司(EPC)宣布推出内含集成式自举功能的场效应晶体管的eGaN半桥功率集成电路 EPC2107(100 V)及EPC2108(60 V)。该集成电路去除了由栅极驱动器所引致的反向恢复损耗,也不需高侧箝位。这是首次在eGaN功率电路中集成了一个自举场效应晶体管。
阅读全文