EL SEGUNDO, Calif.—  March 2023 – Efficient Power Conversion (EPC), the world’s leader in enhancement-mode gallium nitride FETs and ICs, has teamed up with SHARGE Technology (SHARGE) to design a 67 W USB PD charger with a power display screen. The Retro 67 fast charger uses EPC’s 100 V GaN FET, EPC2218, which can deliver 231 A pulsed current in a tiny footprint of 3.5 mm x 1.95 mm offering designers a significantly smaller, more efficient device than silicon MOSFET for USB PD fast chargers.

EPC2218 provides SHARGE’s All-GaN fast charger with higher efficiency, state-of-the-art power density and lower system cost.

EPC’s GaN Experts will be available during APEC, showcasing the latest generation of GaN FETs and ICs in a wide variety of real-world applications.

EL SEGUNDO, Calif. — March 2023 — EPC, the world’s leader in enhancement-mode gallium nitride FETs and ICs,will be delivering multiple technical presentations at the premier power electronics conference; the IEEE Applied Power Electronics Conference and Exposition (APEC 2023) in Orlando from March 19^th through the 23^rd (see detailed schedule below).  In addition, the company will demonstrate it’s latest generation of eGaN^® FETs and ICs in applications ranging from high-power density computing, eMobility, robotics, solar power, battery charging, and more in booth # 732 in the Orange County Convention Center.  Stop by to see the ‘Wall of GaN’ – the broadest portfolio of GaN power semiconductors in the market available for off-the-shelf delivery.

EPC introduces the EPC9177, an eGaN^® IC-based reference design for high power density, low profile DC-DC converters to address new USB PD 3.1 stringent demands for multiport chargers and on-motherboard DC-DC converting 28 V – 48 V input to 12 V or 20 V output.

EL SEGUNDO, Calif.—  February, 2023 — EPC announces the availability of the EPC9177, a digitally-controlled, single-output synchronous buck converter reference design board operating at 720 kHz switching frequency converting an input voltage of 48 V, 36 V, 28 V to a regulated 12 V output voltage and delivering up to 20 A continuous output current.

Efficient Power Conversion (EPC) introduces the 200 V, 10 mΩ EPC2307 that completes a family of six GaN transistors rated at 100V, 150V, and 200V, offering higher performance, smaller solution size, and ease of design for DC-DC conversion, AC/DC SMPS and chargers, solar optimizers and microinverters, and motor drives.

EL SEGUNDO, Calif.— January 2023 — EPC, the world’s leader in enhancement-mode gallium nitride FETs and ICs, introduces the 200 V, 10 mΩ EPC2307 in a thermally enhanced QFN in a tiny 3 mm x 5 mm footprint.

EPC introduces the 80 V, AEC-Q101-qualified EPC2252 GaN FET, offering designers significantly smaller and more efficient solutions than silicon MOSFETs for automotive-grade lidar, 48 V – 12 V DC-DC conversion, and low inductance motor drives.

EL SEGUNDO, Calif. — January 2023 — Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride (eGaN^®) FETs and ICs, expands the selection of automotive, off-the-shelf gallium nitride transistors with the introduction of the 80 V, 11 mΩ EPC2252 that delivers 75 A pulsed current in a 1.5 mm x 1.5 mm footprint. The EPC2252 offers power system designers significantly smaller and more efficient devices than silicon MOSFETs for automotive-grade lidar found in autonomous driving and other ADAS applications, 48  V – 12 V DC-DC conversion, and low inductance motor drives.

Efficient Power Conversion (EPC) introduces EPC21701, an 80 V laser driver IC capable of 15 A pulsed current for time-of-flight (ToF) lidar applications including vacuum cleaners, robotics, 3D security cameras and 3D sensing. 

EL SEGUNDO, Calif.— January 2023 — EPC announces the introduction of the EPC21701, a laser driver that monolithically integrates an 80 V, 40 A FET with gate driver and 3.3 logic level input into a single chip for time-of-flight lidar systems used in robotics, surveillance systems, and vacuum cleaners. It is tailored to lidar systems for gesture recognition, time of flight (ToF) measurement, robotic vision, or industrial safety.

EPC and Richtek introduce a reference design that achieves greater than 98% efficiency using the RT6190 buck boost controller and EPC2204 EPC GaN FETs

EL SEGUNDO, Calif.—  January 2023 — EPC & Richtek announces the availability of a 4-switches bidirectional buck-boost controller reference design board that converts an input voltage of 12 V - 24 V to a regulated 5 V - 20 V output voltage and delivers up to 5 A continuous current and 6.5 A maximum current. The combination of the new Richtek RT6190 controller with ultra-efficient EPC2204 GaN FETs from EPC shrinks the solution size by greater than 20% compared to traditional solutions for high-power density applications.  The solution achieves greater than 98% efficiency for 20 V and 12 V output voltage and can operate without heatsink with maximum rise temperature below 15 degC for 20 V to 5 V, and 55 degC for 12 V to 20 V, at 5 A continuous current.

Efficient Power Conversion (EPC) introduces the 150 V, 3 mΩ EPC2305 and the 200 V, 5 mΩ EPC2304 GaN FETs offering higher performance and smaller solution size and cost for DC-DC conversion, AC/DC SMPS and chargers, solar optimizers and microinverters, and motor drives.

EL SEGUNDO, Calif.— December 2022 — EPC, the world’s leader in enhancement-mode gallium nitride FETs and ICs, introduces the 150 V, 3 mΩ EPC2305 and the 200 V, 5 mΩ EPC2304 GaN FETs in a thermally enhanced QFN package with exposed top and tiny 3 mm x 5 mm footprint.

EPC introduces two new 80 V AEC-Q101 qualified GaN FETs, offering designers significantly smaller and more efficient solutions than silicon MOSFETs for automotive 48 V- 12 V DC-DC conversion, infotainment, and lidar for autonomous driving.

EL SEGUNDO, Calif. — November 2022 — Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride (eGaN^®) FETs and ICs, expands the selection of automotive, off-the-shelf gallium nitride transistors with the introduction of 80 V, 6 mΩ EPC2204A that delivers 125 A pulsed current in a 2.5 mm x 1.5 mm footprint and the 80 V, 3.2 mΩ EPC2218A that delivers 231 A pulsed current is a 3.5 mm x 1.95 mm footprint, offering designers significantly smaller and more efficient devices than silicon MOSFETs for automotive DC-DC for 48V-12V conversion, infotainment, and lidar for autonomous driving.

Efficient Power Conversion (EPC) strengthens market leadership in gallium nitride power conversion by adding significant 8-inch manufacturing capacities in collaboration with Vanguard International Semiconductor Corporation (VIS).

EL SEGUNDO, Calif.— December 6, 2022 — EPC, the world’s leader in gallium nitride (GaN) power FETs and integrated circuits (ICs), and Vanguard International Semiconductor Corporation (VIS), a leading specialty IC foundry service provider, today jointly announced a multi-year production agreement to produce gallium nitride-based power semiconductors. EPC will utilize VIS’ 8-inch (200 mm) wafer fabrication capabilities, significantly increasing manufacturing capacities for EPC’s high-performance GaN transistors and integrated circuits. Manufacturing will commence in early 2023.

Efficient Power Conversion (EPC) introduces the 80 V, 4 mOhm EPC2619 GaN FET in tiny 1.5 mm x 2.5 mm footprint, offering higher performance and smaller solution size than traditional MOSFETs for high power density applications, including DC-DC conversion, motor drives, and synchronous rectification for 12 V – 20 V.

EL SEGUNDO, Calif.— November 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (GaN) power FETs and ICs, launches the 80 V, 4 mOhm EPC2619. This is the lead product for a new generation of eGaN devices that have double the power density compared to EPC’s prior-generation products.

GaN FETs help Solarnative achieve industry-leading power density for solar microinverters, enabling module frame integration to solve the challenges of solar power installation.

EL SEGUNDO, Calif.— November 2022 Solarnative uses GaN devices in its new microinverter to achieve industry-best power density.  The Power Stick is the smallest inverter in the world, with dimensions of 23.9 by 23,2 by 404 millimeters. With an AC output power of 350 W, the volume of 0.19 liters corresponds to a power density of 1.6 kW per liter. By comparison, the IQ 7A microinverter from a market leading supplier delivers 349 watts with a volume of 1.12 liters, corresponding to 0.31 kW per liter – not even one-fifth of the Solarnative device. Despite the extreme size reduction, the European efficiencies are quite comparable, at 96.0 percent for the Power Stick and 96.5 percent for the IQ 7A.

Efficient Power Conversion (EPC) introduces the 150 V, 6 mΩ EPC2308 GaN FET, offering higher performance and smaller solution size for high power density applications including DC-DC conversion, AC/DC SMPS and chargers, solar optimizers and microinverters, and motor drives.

EL SEGUNDO, Calif.— October 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (eGaN^®) power FETs and ICs, expands the selection of off-the-shelf GaN FETs in thermally enhanced QFN packages with the introduction of the 150 V EPC2308 designed for motor drive in power tools and robots, high density DC-DC from/to 80 V-100 V for industrial applications, synchronous rectification to 28 V – 54 V for chargers, adaptors and power supplies, smartphones USB fast chargers, and in solar optimizers and microinverters.

The EPC9176 GaN-based inverter reference design enhances motor drive system performance, range, precision, torque, all while simplifying design. The extremely small size of this inverter allows integration into the motor housing resulting in the lowest EMI, highest density, and lowest weight.

EL SEGUNDO, Calif.— October, 2022 — EPC announces the availability of the EPC9176, a 3-phase BLDC motor drive inverter using the EPC23102 ePower™ Stage GaN IC with embedded gate driver function and two GaN FETs with 5.2 mΩ typical R_DS(on). The EPC9176 operates from an input supply voltage between 20 V and 80 V and can deliver up to 28 Apk (20 A_RMS). This voltage range and power level makes the solution ideal for a variety of 3-Phase BLDC motor drive applications with 36 V – 80 V input including eBikes, eScooters, power tools, drones, robots, DC servo, medical robots and factory automation.

New Motor Drive Center of Excellence (CoE) design center in Turin, Italy, to help customers exploit the power of GaN for growing motor drive applications

EL SEGUNDO, Calif.— September, 2022 —   EPC has opened a new design application center near Turin, Italy, to focus on growing motor drive applications based on GaN technology in the e-mobility, robotics, drones, and industrial automation markets.  The specialist team will support customers in accelerating their design cycles and define future Integrated Circuits for power management with state-of-the art equipment to test applications from 400 W to 10’s of kW.

Efficient Power Conversion (EPC) introduces the 100 V, 3.8 mΩ EPC2306 GaN FET, offering higher performance and smaller solution size for high power density applications including DC-DC conversion, AC/DC chargers, solar optimizers and microinverters, motor drives, and Class D Audio.

EL SEGUNDO, Calif.— September 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (eGaN^®) power FETs and ICs, expands the selection of off-the-shelf GaN FETs in thermally enhanced QFN packages with the introduction of the 100 V EPC2306 designed for 48 V DC-DC conversion used in high-density computing applications, in 48 V BLDC motor drives for e-mobility and robotics, and in solar optimizers and microinverters, and Class D Audio.

The 100 V EPC2218 GaN FETs alleviate space limitations to achieve higher frequency and power rating in BRC’s new M500/14 power optimizer

EL SEGUNDO, Calif.— August 2022.  BRC Solar GmbH has revolutionized the photovoltaic market with its power optimizer, increasing energy yield and performance of pv plants and systems. Designing-in Efficient Power Conversion’s EPC2218 100 V FETs into its next generation M500/14 power optimizer has enabled a higher current density due to the low power dissipation and the small size of the GaN FET making the critical load circuit more compact. The small parasitic capacitance and inductance of the GaN FETs creates a clean switching performance which allows good EMI behavior in the field. Another benefit of the GaN FETs is the zero reverse recovery losses.

Efficient Power Conversion (EPC) introduces the latest ePower™ Stage IC that integrates a complete GaN half-bridge power stage capable of up to 35 A at 1 MHz operation offering higher performance and smaller solution size for high power density applications including DC-DC conversion, motor drives, and class-d audio amplifiers.

EL SEGUNDO, Calif.— August 2022 — EPC announces the introduction of a 100 V, 35 A integrated circuit designed for 48 V DC-DC conversion used in high-density computing applications and in 48 V BLDC motor drives for e-mobility, robotics, and drones.  

Efficient Power Conversion (EPC) expands its family of radiation-hardened (rad-hard) gallium nitride (GaN) products for power conversion solutions in critical spaceborne and other high-reliability environments with the addition of a fifth rad hard device to the product family.

EL SEGUNDO, Calif.— June 2022 — EPC announces the introduction of the EPC7004 radiation-hardened GaN FET. The EPC7004 is a 100 V, 7 mΩ, 160 A_Pulsed, rad-hard GaN FET in a small 6.56 mm² footprint. The EPC7004 has a total dose radiation rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm²). The EPC7004, along with the rest of the Rad Hard family, EPC7014, EPC7007, EPC7019, EPC7018, are offered in a chip-scale package, the same as the commercial eGaN^® FET and IC family.  Packaged versions will be available from EPC Space.

Efficient Power Conversion (EPC) expands its family of radiation-hardened (rad-hard) gallium nitride (GaN) products for power conversion solutions in critical spaceborne and other high-reliability environments with a 100 V device that has the lowest on-resistance of any 100 V rad hard transistor currently available on the market.

EL SEGUNDO, Calif.— June 2022 — EPC announces the introduction of the EPC7018 radiation-hardened GaN FET. The EPC7018 is a 100 V, 3.9 mΩ, 345 A_Pulsed, rad-hard GaN FET in a small 13.9 mm² footprint. The EPC7018 has a total dose radiation rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm²). The EPC7018, along with the rest of the Rad Hard family, EPC7014, EPC7007, EPC7019, are offered in a chip-scale package, the same as the commercial eGaN^® FET and IC family.  Packaged versions will be available from EPC Space.