News

Sign up today to get the latest news and updates from EPC on new product announcements, applications work, and much more. Sign up for EPC email updates.

EPC and Analog Devices Collaborate to Deliver up to 2 MHz Switching Frequency for the Highest Density DC-DC Converters Using GaN FETs

EPC and Analog Devices Collaborate to Deliver up to 2 MHz Switching Frequency for the Highest Density DC-DC Converters Using GaN FETs

EPC and Analog Devices introduce reference design using a new Analog controller fully optimized to drive EPC GaN FETs. The combination of the new Analog LTC7890 synchronous GaN buck controller with ultra-efficient eGaN® FETs from EPC (Efficient Power Conversion) enables up to 2 MHz switching frequency for high power density and low-cost DC-DC Conversion.

EL SEGUNDO, Calif.—  March, 2022 — EPC announces the availability of the EPC9160, a dual output synchronous buck converter reference design board operating at 2 MHz switching frequency that converts an input voltage of 9 V to 24 V to a 3.3 V or 5 V output voltage and delivers up to 15 A continuous current for both outputs. Thanks to the high switching frequency the converter size is very small, only 23 mm x 22 mm for both outputs, and the inductor height is only 3 mm.

Read more

High Performance 1 kW per Phase 48 V/12 V Converter Using GaN ePower Stage

High Performance 1 kW per Phase 48 V/12 V Converter Using GaN ePower Stage

Automotive 48 V/12 V converters are essential in modern hybrid electric vehicles, as the energy is exchanged between the 48 V and 12 V buses. This two-voltage system accommodates legacy 12 V systems and provides higher power for 48V to loads such as vacuum and water pumps, electric super chargers, steering, and audio systems. Among all the requirements for the 48 V/12 V converter, efficiency, power density, size and cost are on the top of the list. This article addresses these design criteria by employing the GaN ePower™ Stage, EPC23101, and compares it with a previous design using discrete EPC2206 devices.

Bodo’s Power Systems
March, 2022
Read article

Read more

Where is GaN Headed in 2022?

Where is GaN Headed in 2022?

Video Interview - Efficient Power Conversion’s CEO, Alex Lidow, talks with Electronic Design about the future of gallium nitride (GaN), the rate of GaN adoption and its use in power supplies and other technologies.

Electronic Design
March, 2022
View video

Read more

Roadblocks to GaN Adoption in Power Systems

Roadblocks to GaN Adoption in Power Systems

In this article, the most common reasons for some customers to be slower in their embracing what is clearly a displacement technology for their older silicon-based power MOSFETs will be discussed. Without going into the detailed statistics, a list of reasons, in order of frequency is derived. This list is based upon the understanding that some applications will place higher emphasis than others on certain characteristics of GaN. Our discussion is limited to devices rated at less than 400 V, as that is the application focus for Efficient Power Conversion (EPC) FET and IC products.

Power Systems Design
March, 2022
Read article

Read more

Efficient Power Conversion (EPC) to Showcase how GaN is Leading the 48 V Revolution Across Multiple Industries at APEC 2022

Efficient Power Conversion (EPC) to Showcase how GaN is Leading the 48 V Revolution Across Multiple Industries at APEC 2022

EPC’s GaN Experts will be available during APEC, exhibiting various demonstrations showcasing how GaN technology’s superior performance is transforming the delivery of power across many industries, including computing, communications, and emobility.

EL SEGUNDO, Calif. — March 2022 — The EPC team will be delivering multiple technical presentations, as well as a professional seminar on gallium nitride (GaN) technology and applications at the IEEE Applied Power Electronics Conference and Exposition (APEC 2022) in Houston from March 20th through the 24th (See detailed schedule below). In addition, the company will demonstrate its latest eGaN® FETs and ICs in a large variety of customer end products in booth #1307.

Read more

Premium Motor Drive Performance at Low Cost for e-bikes, Drones, and Robotics with GaN FETs from EPC

Premium Motor Drive Performance at Low Cost for e-bikes, Drones, and Robotics with GaN FETs from EPC

The EPC9167 GaN-based inverter reference design enhances motor system performance, range, precision, torque, all while lowering overall system cost. The extremely small size of this inverter allows integration into the motor housing resulting in the lowest EMI, highest density, and lowest weight.

EL SEGUNDO, Calif.— February, 2022 — EPC announces the availability of the EPC9167, a 3-phase BLDC motor drive inverter using the EPC2065 eGaN® FET. The EPC9167 operates from an input supply voltage between 14 V and 60 V (nominal 48 V) and has two configurations – a standard unit and a high current version:

Read more

Better thermal management of eGaN FETs

Better thermal management of eGaN FETs

A few simple thermal management guidelines can help conduct heat away from GaN FETs. Enhancement-mode gallium nitride (eGaN) FETs offer high power-density with ultra-fast switching and low on-resistance, all in a compact form factor. However, the power levels these high-performance devices provide can be limited by extreme heat-flux densities. If not managed properly, the generated heat can compromise reliability and performance. Fortunately, chip-scale packaging for eGaN FETs can be leveraged at the board-side and the backside (i.e., case) to better dissipate heat.

Power Electronics Tips
February, 2022
Read article

Read more

EPC Collaborates with MPS to Develop a 2 kW, 48 V/14 V, Regulated Output Voltage, DC-DC Reference Design Board with EPC latest GaN FETs for More Efficient, Smaller, Faster, Bidirectional Converters

EPC Collaborates with MPS to Develop a 2 kW, 48 V/14 V, Regulated Output Voltage, DC-DC Reference Design Board with EPC latest GaN FETs for More Efficient, Smaller, Faster, Bidirectional Converters

The EPC9165 is a two-phase, regulated output voltage, 48 V – 14 V bidirectional converter that delivers 2 kW with 96.8% peak efficiency

EL SEGUNDO, Calif.— February 2022 — EPC announces the availability of the EPC9165, a 2 kW, two-phase 48 V – 14 V bidirectional converter that operates with 97 % peak efficiency in a small footprint. This solution is ideal for high-density and high-power 48V battery packs such as those required for eMobility and light mobility.

Read more

Electrifying Power Hungry Loads

Electrifying Power Hungry Loads

This article presents the design and performance of an automotive buck/reverse-boost converter with GaN for efficient 48 V power distribution.

Electronics Today
December/January Edition
Read article

Read more

Automotive Buck/Reverse-Boost Converter with GaN for Efficient 48 V Power Distribution

Automotive Buck/Reverse-Boost Converter with GaN for Efficient 48 V Power Distribution

Demonstrating the design of a bi-directional DC-DC converter for automotive 48 V power distribution, showing how GaN technology is a powerful enabler for efficient electrification. The trend towards increasing electrification in the automotive industry enables car makers both to deliver new innovations to market cost-effectively and to meet increasingly stringent emissions legislation. Raising the vehicle’s main bus voltage to 48 V helps meet the demands of power-hungry systems such as the start-stop motor/generator of a mild hybrid vehicle, as well as loads such as electric power steering, electric supercharging, and vacuum and water pumps.

Bodo’s Power Systems
December, 2021
Read article

Read more

ePower Chipset Family for High Power Density Applications Chosen as Bodo’s Power System ‘Product of the Month’

ePower Chipset Family for High Power Density Applications Chosen as Bodo’s Power System ‘Product of the Month’

EPC has introduced a 100 V, 65 A integrated circuit chipset designed for 48 V DC-DC conversion used in high-density computing applications and in 48 V BLDC motor drives for e-mobility, robotics, and drones. The EPC23101 eGaN IC plus EPC2302 eGaN FET offers an ePower Chipset capable of a maximum withstand voltage of 100 V, delivering up to 65 A load current, while capable of switching speeds greater than 1 MHz.

Bodo’s Power Systems
February, 2022
Read article

Read more

EPC Releases Phase 14 Report on GaN Reliability and the use of Physics-Based Models to Project eGaN Device Lifetime

EPC Releases Phase 14 Report on GaN Reliability and the use of Physics-Based Models to Project eGaN Device Lifetime

Efficient Power Conversion (EPC) publishes Phase-14 Reliability Report, which adds to the extensive knowledge and demonstrates a robustness capability unmatched by silicon power devices.

EL SEGUNDO, Calif.— February 2022 — EPC announces its Phase-14 Reliability Report, documenting the strategy used to achieve a remarkable field reliability record. The rapid adoption of GaN devices in many diverse applications calls for the continued accumulation of reliability statistics and research into the fundamental physics of failure in GaN devices. The Phase-14 Reliability Report presents the strategy used to measure and predict lifetime based upon tests that force devices to fail under various conditions. This information can be used to create more robust and and higher performance products for applications such as lidar for autonomous cars, robotics, security, and drones, high power density computing, and satellites, to name just a few.

Read more

2 kW, 48 V/14 V, Bidirectional Converter with Regulated Output Voltage Reference Design Board featuring ePower™ Chipset launched by EPC

2 kW, 48 V/14 V, Bidirectional Converter with Regulated Output Voltage Reference Design Board featuring ePower™ Chipset launched by EPC

The EPC9170 is a two-phase, regulated output voltage, 48 V – 14 V bidirectional converter that delivers 2 kW with 96.8% peak efficiency

EL SEGUNDO, Calif.— January 2022 — EPC announces the availability of the EPC9170, a 2 kW, two-phase 48 V – 14 V bidirectional converter that operates with 96.8% peak efficiency in a small footprint. The board features the ePower™ 100 V, 65 A integrated circuit chipset. The chipset includes the EPC23101 eGaN® IC plus EPC2302 eGaN® FET for a solution capable of a maximum withstand voltage of 100 V, delivering up to 65 A load current, while capable of switching speeds greater than 1 MHz.

Read more

Easy-to-Use Design Tools Reduce Time to Market for High Performance Gallium Nitride (GaN) Based Power System Designs

Easy-to-Use Design Tools Reduce Time to Market for High Performance Gallium Nitride (GaN) Based Power System Designs

Efficient Power Conversion (EPC) provides engineers with a growing array of design tools, models, and performance simulations for high performance GaN-based designs.

EL SEGUNDO, Calif.—  January, 2022 — EPC announces the debut of the GaN Power Bench™, a suite of design tools to assist engineers in getting the optimal performance from their GaN-based designs. eGaN® FETs and ICs provide the fast switching, high efficiency and small size that can meet the stringent power density requirements of today’s leading-edge applications. The tools in the GaN Power Bench assist designers in the selection of the best GaN device for the application, simulate and optimize the thermal performance of the design, and provide application examples with all the supporting documentation needed to quickly and easily replicate the optimal design tips necessary for ideal performance.

Read more

The Impact of GaN on Advanced Automotive Design

The Impact of GaN on Advanced Automotive Design

Wide-bandgap semiconductors like gallium nitride (GaN) and silicon carbide (SiC) are changing how people are thinking about power. In this video, Electronic Design talks to Alex Lidow, Founder and CEO of Efficient Powert Conversion (EPC), about the growing role of GaN in advanced embedded applications like automotive, among others such as space.

Electronic Design
January, 2022
View video

Read more

CES 2022: GaN Technology for the Next Future

CES 2022: GaN Technology for the Next Future

The year 2021 was a transitional year in which the world decided to open its doors to GaN. In this interview with Power Electronics News during CES week, GaN industry experts confirmed that GaN is now proving its superiority over silicon.

Power Electronics News
January, 2022
Read article

Read more

EPC Introduces a 12 V – 48 V 500 W GaN Boost Converter Demonstration with Same BOM Size as Silicon, Offering Superior Efficiency and Power Density

EPC Introduces a 12 V – 48 V 500 W GaN Boost Converter Demonstration with Same BOM Size as Silicon, Offering Superior Efficiency and Power Density

The combination of the Renesas two-phase synchronous GaN boost controller with ultra-efficient eGaN® FETs from EPC (Efficient Power Conversion) enables high power density and low-cost DC-DC conversion.

EL SEGUNDO, Calif.—  January, 2022 — EPC announces the availability of the EPC9166, a 500 W DC-DC demo board that converts a 12 V input to 48 V output. The EPC9166 demo board demonstrates the Renesas ISL81807 80 V two-phase synchronous boost controller with the latest generation EPC2218 eGaN FETs from EPC to achieve greater than 96.5% efficiency in a 12 V input to 48 V regulated output conversion with 500 kHz switching frequency.  The output voltage can be configured to 36 V, 48 V, and 60 V. The board can deliver 480 W power without a heatsink.

Read more
RSS
First2345791011Last