EPC will exhibit more than 25 demonstrations showing how GaN technology’s superior performance is changing the way we live and company experts will deliver seven technical presentations on GaN FET and IC technology at APEC^® 2017, the premier global event in applied power electronics.

EL SEGUNDO, Calif. — March 2017 — The EPC team will be delivering seven technical presentations on gallium nitride (GaN) technology and applications at APEC 2017 in Tampa, Florida from March 26th through the 30th. In addition, the company will feature its latest eGaN^® FETs and ICs, as well as their customers’ end products that are enabled by eGaN technology.

Adding to its breadth of applications research and support for EPC customer evaluation and use of GaN^® FETs and ICs, the company announces the opening of an applications center and the appointment of Suvankar Biswas, Ph.D. as senior applications engineer.

EL SEGUNDO, Calif.— January 2017 — Efficient Power Conversion Corporation (EPC) is proud to announce the opening of an Applications Center in Blacksburg, Virginia.  This center will increase the reach of EPC to support research and development for the applications of enhancement-mode gallium nitride transistors and ICs.  In addition to traditional FET and IC power conversion applications, GaN technology has enabled emerging applications such as wireless power transfer, LiDAR for autonomous vehicles, and envelope tracking for high bandwidth 4G and 5G communications.

Ultra fast transition eGaN^® FETs used on the EPC9126 can drive laser diodes with high current pulses and total pulse widths as low as 5 ns, thus enhancing the quality of information a LiDAR system will detect, including the accuracy, precision, and processing speed.

EL SEGUNDO, Calif. — January 2017 — Efficient Power Conversion Corporation (EPC) announces the availability of the EPC9126, a 100 V high current pulsed laser diode driver evaluation board. In a LiDAR system, used for detecting objects in autonomous vehicle applications, speed and accuracy of detection is critical. As demonstrated by this board, the rapid transition capability of eGaN FETs provide power pulses to drive the laser up to ten times faster than an equivalent MOSFET, thus enhancing the overall performance of a LiDAR system.

In a dedicated hospitality suite at CES, the premier global event in consumer electronics, EPC will show how GaN is a core technology behind autonomous vehicles, the house of the future without power cords, the connected car, and non-invasive colonoscopies with an x-ray system within a pill.

EL SEGUNDO, Calif. — December 2016 — Efficient Power Conversion (EPC) will be hosting a hospitality suite in the Mandalay Bay hotel at the Consumer Electronics Show (CES) in Las Vegas, January 5^th through the 8^th.

Wireless charging systems resulting from the WiTricity, ASD, and EPC collaboration will be on display at the Consumer Electronics Show (CES) 2017, January 5th – 8th, 2017 in Las Vegas, Nevada.

EL SEGUNDO, Calif. - Efficient Power Conversion Corporation (EPC) announces accelerated efforts to build magnetic resonance based wireless charging systems based on WiTricity’s reference designs that feature gallium nitride (GaN)-based solutions with ASD Technology Limited (ASD). This ramp-up in activity is in response to recently rising customer and end-system manufacturer interests in wireless charging products using gallium nitride technology.

JJPlus Corporation and Efficient Power Conversion Corporation (EPC) announce their design collaboration for innovative wireless charging designs.

EL SEGUNDO, Calif — October 25, 2016 — In an effort to address the recently announced Taiwan wireless power standards organization’s announcement of adopting AirFuel™ Alliance’s resonant wireless charging standard, JJPlus Corporation and Efficient Power Conversion Corporation announce their collaboration to design GaN-based wireless power solutions. In addition to the Taiwan initiative, these designs will have application for wireless charging systems worldwide.

On November 3rd, IEEE PELS will offer a webinar by Alex Lidow and Michael de Rooij discussing the design and PCB manufacturing methods for using chip-scale packaged GaN power devices.

EL SEGUNDO, Calif.— October 2016 — Efficient Power Conversion Corporation (EPC) experts on the design and use of gallium nitride transistors will conduct a one-hour webinar sponsored by the IEEE Power Electronics Society (PELS) on November 3rd from 11:00 AM to 12:00 PM (EDT).

The superior characteristics of eGaN ^® FETs and ICs enable a lower cost single transmit amplifier solution that can wirelessly charge devices regardless of the standard used in the receiving device.

EL SEGUNDO, Calif — September 2016 — Efficient Power Conversion Corporation’s (EPC) EPC9121 multi-mode wireless charging demonstration system has been honored with an Electronic Products China’s “Top 10 Power Product – Breakthrough Technology Award.” The award is a benchmark for recognizing a significant advancement in a technology or its application that leads the industry trend. The award presentation was announced on September 8^th, 2016 in Beijing, China during its Power Conference.

EPC Phase Eight Reliability Report documents a combined total of over 8 million GaN device-hours with zero failures. The report examines, in detail, the stress tests that EPC devices are subjected to prior to release as qualified products and analyzes the physics of failure.

EL SEGUNDO, Calif.— July 2016 — EPC announces its Phase Eight Reliability Report showing the results of the rigorous set of JEDEC-based qualification stress tests eGaN FETS and integrated circuits undertake prior to being considered qualified products.

Ismosys now represents EPC’s European sales, marketing, and technical support to assist customers in adopting eGaN^® FETs and ICs for leading-edge power conversion systems using gallium nitride

EL SEGUNDO, Calif.—July 2016 — To support its accelerating growth throughout Europe, Efficient Power Conversion Corporation (EPC) is proud to announce the appointment of Ismosys as its sales, marketing, and technical support representative.  Ismosys, founded in 1994, provides support to design houses, designers and engineers across Europe. This is achieved through 10 regional offices covering the entire EMEA and a significant centralized resource, fostering sales, driving marketing and enabling technical support. 

EPC’s new value-added partnership with ASD aims to support customer designs from conception to manufacturing of eGaN^® technology-based wireless power charging and other emerging applications.

EL SEGUNDO, Calif.— July 2016 — Efficient Power Conversion Corporation (EPC), Los Angeles-based innovator in gallium nitride (eGaN) technology for replacing MOSFET technology, has joined forces with ASD Technology Limited (ASD), a Hong-Kong-based company delivering best-in-class customer solutions for applications using the latest eGaN technology.

The superior characteristics of eGaN^® FETs and ICs enable a lower cost single transmit amplifier solution that can wirelessly charge devices regardless of the standard used in the receiving device.

EL SEGUNDO, Calif. — June 2016 — Efficient Power Conversion Corporation (EPC) today announces the availability of a complete demonstration multi-mode wireless power charging kit, the EPC9121. The purpose of this demonstration kit is to simplify the evaluation process of using eGaN FETs and ICs for highly efficient multi-mode wireless power charging systems that can cut across any standard used in the receiving units.

Produced by industry experts, Efficient Power Conversion has posted six videos showing active end-use applications such as wireless power transfer, single-stage 48 V – 1 V DC-DC conversion, and envelope tracking for 4G/LTE base stations using gallium nitride transistors and integrated circuits.

EL SEGUNDO, Calif. – April 2016 - Efficient Power Conversion Corporation (www.epc-co.com) has created and posted to its website six short videos presenting end-customer applications using eGaN® FETs and ICs. The videos show how GaN technology is changing the way we live and challenge power systems design engineers to incorporate the high performance of gallium nitride FETs and ICs into their next generation power system designs.

Designers using state-of-the-art GaN transistors and IC’s for power conversion now have the use of an interactive web-based parametric selection tool to search for the best possible GaN solution for their given power conversion system.

EL SEGUNDO, Calif.—April 2016— Efficient Power Conversion Corporation (EPC) announces the implementation of a user-controlled GaN product selector search tool on the EPC website, epc-co.com. Based upon years of EPC customer interactions, this web-based product selector guide provides power system design engineers the following:

Freebird Semiconductor and Efficient Power Conversion (EPC) have entered into an agreement whereby Freebird will develop products for use in high reliability space and harsh environment applications based upon eGaN^® power transistors and integrated circuits.

NORTH ANDOVER, MA. — April 2016 — Freebird Semiconductor Corporation, North Andover, Massachusetts announces the signing of an agreement with Efficient Power Conversion Corporation (EPC), the leading provider of enhancement-mode gallium nitride power transistors to develop products for use in high reliability, space, and harsh environment applications based upon EPC’s eGaN^® technology.

EPC’s new development boards can be configured as either a buck converter or a ZVS class-D amplifier, demonstrating reduced losses at high frequency using an eGaN FET synchronous bootstrap augmented gate drive.

EL SEGUNDO, Calif.— March 2016 — Efficient Power Conversion Corporation (EPC) Introduces the EPC9066, EPC9067, and EPC9068 development boards, which are configurable to a buck converter or as a ZVS class-D amplifier. These boards provide an easy-to-use way for power systems designers to evaluate the exceptional performance of gallium nitride transistors, enabling the designers to get their products into volume production quickly. All three boards feature a zero reverse recovery (Q_RR) synchronous bootstrap rectifier augmented gate driver to increase efficiency at high frequency operation, up to 15 MHz. The boards can produce a maximum output of 2.7 A in the buck and ZVS class-D amplifier configurations. Loss reduction is realized across the entire current range.

EPC Phase Seven Reliability Report shows that eGaN^® FETs have solid reliability and are dependable replacement solutions to traditional silicon devices.

EL SEGUNDO, Calif.— March 2016 — EPC announces its Phase Seven Reliability Report showing the distribution of over 17 billion accumulated field-device hours and detailing test data from more than 7 million equivalent device-hours under stress. The stress tests included intermittent operating life (IOL), early life failure rate (ELFR), humidity with bias, temperature cycling, and electrostatic discharge. The study reports a composite 0.24 FIT rate for products in the field, which is consistent with all of EPC’s in situ evaluations to date and validates the readiness of eGaN FETs to supplant their aging silicon cousins for commercial power switching applications.

EPC will exhibit more than 20 demonstrations showing how GaN technology’s superior performance is changing the way we live and company experts will deliver six technical presentations on GaN FET technology at APEC^® 2016, the premier global event in applied power electronics

EL SEGUNDO, Calif. — March, 2016 — The EPC team will be presenting six technical presentations on gallium nitride (GaN) technology and applications at APEC 2016 in Long Beach, California from March 20th through the 24th. In addition, the company will feature its latest eGaN^® FETs and IC’s as well as their customers’ end products that are enabled by eGaN technology. Demonstrations will include wireless power systems that span the full power range of Qi and AirFuel standards and a multi-mode solution, a single stage 48 V – 1 V DC-DC converter, 3-D real-time LiDAR imaging camera, and an LTE compatible envelope tracking supply in booth #2244.

EPC9065 development board has the highest power and highest efficiency at 6.78 MHz for the AirFuel^TM wireless power standard, using eGaN^® FETs

EL SEGUNDO, Calif.— February 2016 — Efficient Power Conversion (EPC) announces the EPC9065, a development board that can serve as the amplifier stage for AirFuel^TM Alliance Class 4 and Class 5 wireless power transfer applications. This board is a Zero Voltage Switching (ZVS) differential-mode class-D amplifier development board configured at, but is not limited to, 6.78 MHz (Lowest ISM band).

New EPC2040 eGaN^® FET offers extremely fast and consistent switching, enabling greater resolution and accuracy in applications dependent upon pulsed laser drivers, which include LiDAR systems used for guidance in 3D sensing in augmented reality systems and autonomous vehicles

EL SEGUNDO, Calif. — February 2016 — Efficient Power Conversion Corporation (EPC) announces the EPC2040 power transistor, an extremely small, fast switching gallium nitride power transistor that enables superior resolution, faster response time, and greater accuracy for high speed end-use applications. High stability of the threshold over temperature ensures the high stability as the laser heats up. For example, this product is ideal for pulsed laser drivers used in LiDAR technology, the technology at the heart of autonomous vehicle guidance systems and augmented reality platforms. The end result of the EPC2040’s superior performance is increased accuracy and higher resolution in these systems.