Modern solar panels are demanding increasingly higher power density and longer operating lifetimes. Solar applications including power optimizers and panels with built-in microinverters are becoming the prevailing trend for an increasing number of solar customers, where low voltage GaN power devices (V_DS < 200 V) are extensively used.

Bodo’s Power Systems
May, 2023
Read article

Efficient Power Conversion (EPC) publishes Phase-14 Reliability Report, which adds to the extensive knowledge and demonstrates a robustness capability unmatched by silicon power devices.

EL SEGUNDO, Calif.— February 2022 — EPC announces its Phase-14 Reliability Report, documenting the strategy used to achieve a remarkable field reliability record. The rapid adoption of GaN devices in many diverse applications calls for the continued accumulation of reliability statistics and research into the fundamental physics of failure in GaN devices. The Phase-14 Reliability Report presents the strategy used to measure and predict lifetime based upon tests that force devices to fail under various conditions. This information can be used to create more robust and and higher performance products for applications such as lidar for autonomous cars, robotics, security, and drones, high power density computing, and satellites, to name just a few.

Recently, Efficient Power Conversion (EPC) did a series of tests to take eGaN^® FETs beyond their data sheet limits to quantify the effects of large amounts of overstress voltage and current and the results are published here for the first time.

Bodo’s Power Systems
May, 2021
Read article

Standard qualification testing for semiconductors typically involves stressing devices at-or-near the limits specified in their data sheets for a prolonged period of time, or for a certain number of cycles, with the goal of demonstrating zero failures. By testing parts to the point of failure, an understanding of the amount of margin beyond the data sheet limits can be developed, but more importantly, an understanding of the intrinsic failure mechanisms of the semiconductor can be found.

Bodo’s Power Systems
September, 2020
Read article Read more

Gallium nitride (GaN) power devices have been in volume production since March 2010 and have established a remarkable field-reliability record. An automotive application using GaN power devices in high volume is lidar (light detection and ranging) for autonomous vehicles. Lidar technology provides information about a vehicle’s surroundings, thus requiring high accuracy and reliability to ensure safety and performance. This article will discuss a novel testing mechanism developed by Efficient Power Conversion (EPC) to test eGaN devices beyond the qualification requirements of the Automotive Electronics Council (AEC) for the specific use case of lidar.

eeNews Europe
July 30, 2020
Read article

EPC’s Phase Eleven Reliability Report adds to the knowledge base published in the first ten reports. With this report, EPC demonstrates field experience of 123 billion device hours and a robustness capability unmatched by silicon power devices.

EL SEGUNDO, Calif.— April 2020 — EPC announces its Phase Eleven Reliability Report, documenting the strategy used to achieve a remarkable field reliability record. This strategy relied upon tests forcing devices to fail under a variety of conditions to create stronger products to serve demanding applications such as lidar for autonomous vehicles, LTE base stations, vehicle headlamps, and satellites to name just a few. 

A recent design for an ultra-high speed, low-impedance pulse generator to evaluate oscilloscope probe performance and for determining the feasibility of an in-socket load for ASIC emulation using EPC eGaN™ FET, EPC2037 reveals just how fast these power devices are.

Signal Integrity
March 12, 2020
Read article

Gallium Nitride (GaN) power devices have been in volume production since March 2010 with remarkable field reliability. This article details how by testing parts to the point of failure an understanding of the amount of margin between the data sheet limits can be developed, but more importantly, an understanding of the intrinsic failure mechanisms can be found. By knowing the intrinsic failure mechanisms, the root cause of failure, and the device’s behavior over time, temperature, electrical or mechanical stress, the safe operating life of a product can be determined over a more general set of operating conditions.

Power Systems Design
March 3, 2020
Read article

The increase in switching speed offered by GaN transistors requires good measurement technology, as well as good techniques to capture important details of high-speed waveforms. This article focuses on how to leverage the measurement equipment for the user’s requirement and measurement techniques to accurately evaluate high performance GaN transistors. The article also evaluates high bandwidth differential probes for use with non-ground-referenced waveforms.

EDN Network
By Suvankar Biswas , David Reusch & Michael de Rooij
Read article