EPC introduces two new 80 V AEC-Q101 qualified GaN FETs, offering designers significantly smaller and more efficient solutions than silicon MOSFETs for automotive 48 V- 12 V DC-DC conversion, infotainment, and lidar for autonomous driving.

EL SEGUNDO, Calif. — November 2022 — Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride (eGaN^®) FETs and ICs, expands the selection of automotive, off-the-shelf gallium nitride transistors with the introduction of 80 V, 6 mΩ EPC2204A that delivers 125 A pulsed current in a 2.5 mm x 1.5 mm footprint and the 80 V, 3.2 mΩ EPC2218A that delivers 231 A pulsed current is a 3.5 mm x 1.95 mm footprint, offering designers significantly smaller and more efficient devices than silicon MOSFETs for automotive DC-DC for 48V-12V conversion, infotainment, and lidar for autonomous driving.

GaN FETs in thermally enhanced QFN packages offer higher performance and smaller solution size for high power density applications, including DC-DC conversion, AC/DC chargers, solar optimizers and microinverters, motor drives, and Class D Audio

Power Electronics News
September, 2022
Read article

Efficient Power Conversion (EPC) introduces the 100 V, 3.8 mΩ EPC2306 GaN FET, offering higher performance and smaller solution size for high power density applications including DC-DC conversion, AC/DC chargers, solar optimizers and microinverters, motor drives, and Class D Audio.

EL SEGUNDO, Calif.— September 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (eGaN^®) power FETs and ICs, expands the selection of off-the-shelf GaN FETs in thermally enhanced QFN packages with the introduction of the 100 V EPC2306 designed for 48 V DC-DC conversion used in high-density computing applications, in 48 V BLDC motor drives for e-mobility and robotics, and in solar optimizers and microinverters, and Class D Audio.

Efficient Power Conversion (EPC) introduces the latest ePower™ Stage IC that integrates a complete GaN half-bridge power stage capable of up to 35 A at 1 MHz operation offering higher performance and smaller solution size for high power density applications including DC-DC conversion, motor drives, and class-d audio amplifiers.

EL SEGUNDO, Calif.— August 2022 — EPC announces the introduction of a 100 V, 35 A integrated circuit designed for 48 V DC-DC conversion used in high-density computing applications and in 48 V BLDC motor drives for e-mobility, robotics, and drones.  

EL SEGUNDO, Calif. — September 2021 — Idle power consumption and overall efficiency were key concerns of innosonix GmBH when designing its latest high-end Maxx Series multi-channel power amplifier. By changing from traditional silicon FETs to EPC’s EPC2059 eGaN FET the company reduced idle loss by 35% and lowered the on resistance to increase the total power efficiency by 5%.

The EPC2059 is a 6.8 mΩ, 170 V enhancement-mode gallium nitride (eGaN) transistor offering superior audio performance for high-end amplifier applications. The low on resistance and low capacitance of the EPC2059 enables high efficiency and lowers open loop impedance for low Transient Intermodulation Distortion (T-IMD). The fast-switching capability and zero reverse recovery charge enable higher output linearity and low cross over distortion for lower Total Harmonic Distortion (THD).

These new generation eGaN^® FETs address the new needs of the eMobility, delivery and logistic robot, and drone markets for compact BLDC motor drives and cost-effective high-resolution Time of Flight.

EL SEGUNDO, Calif.— June, 2021 — EPC, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, advances the performance capability while lowering the cost for off-the-shelf gallium nitride transistors with the introduction of EPC2065 and EPC2054

Efficient Power Conversion (EPC) will showcase the company’s latest enhancement-mode gallium nitride-based FETs and ICs demonstrating how GaN technology’s superior performance is transforming power delivery for automotive, computing, and robotics at the PCIM Europe 2021 Digital Days.

EL SEGUNDO, Calif.— April 2021 — The EPC team will be delivering two technical presentations, an educational tutorial, an exhibitor webinar, and participating in panel discussions on gallium nitride (GaN) technology and applications at the upcoming PCIM Europe 2021 Digital Days, May 3 – 7. In addition, the company will participate in the event’s virtual exhibition, showing its latest eGaN FETs and ICs in customers’ end products that are rapidly adopting eGaN^® technology.

Efficient Power Conversion (EPC) announces that the EPC2152 ePower™ Stage IC has received the 2020 Elektra Award for Semiconductor Product of the Year (Analogue).

EL SEGUNDO, Calif.— March 2021 — EPC’s ePower™ stage, EPC2152 Integrated Circuit (IC), has been honored with an Elektra Award 2020 in the Semiconductor Product of the Year – Analogue category. The award presentation was announced on March 25^th during a virtual awards ceremony hosted by Electronics Weekly. These prestigious annual awards have been running for over 19 years to reward and recognize companies and individuals for their excellent performance, innovation, and contribution to the global electronics industry. Judging is carried out by an independently and unbiased, diverse, and knowledgeable panel of industry experts.

Efficient Power Conversion (EPC) expands AEC Q101 product family with the addition of the EPC2219, 65 V gallium nitride transistor with integrated reverse gate clamp diode optimized for high resolution lidar systems.

EL SEGUNDO, Calif.— March 2021 — EPC announces successful AEC Q101 qualification of the 65 V EPC2219 designed for lidar systems in the automotive industry and other harsh environments. 

Efficient Power Conversion (EPC) publishes Phase-12 Reliability Report adding to the extensive knowledge found in their first eleven reports. With this report, EPC demonstrates field experience of 226 billion eGaN ^® device hours and a robustness capability unmatched by silicon power devices.

EL SEGUNDO, Calif.— January 2021 — EPC announces its Phase-12 Reliability Report, documenting the strategy used to achieve a remarkable field reliability record. eGaN devices have been in volume production for more than eleven years and have demonstrated very high reliability in over 226 billion hours of operation, most of which are in vehicles, LTE base stations, and satellites, to name just a few applications with rigorous operating conditions.

EPC introduces the 40 V, 3 milliohm EPC2055 eGaN^® FET, offering designers a device that is smaller, more efficient, and more reliable than currently available devices for high performance, space-constrained applications.

EL SEGUNDO, Calif. — December 2020 — Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, advances the performance capability of low voltage, off-the-shelf gallium nitride transistors with the introduction of the EPC2055 (3 mΩ, 40 V) eGaN FET. 

These new generation 100 V eGaN^® FETs are ideal for 48-V_OUT synchronous rectification, class-D audio, infotainment, and lidar.

EL SEGUNDO, Calif.— September, 2020 — EPC, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, advances the performance capability while lowering the cost of off-the-shelf gallium nitride transistors with the introduction of EPC2218 and EPC2204 100 V eGaN FETs.  The applications for these leading-edge devices include synchronous rectification, class-D audio, infotainment systems, DC-DC converters (hard-switched and resonant), and lidar for autonomous cars, robotics, and drones.

Silicon power MOSFETs have not kept pace with the evolutionary changes in the power electronics industry, where factors such as efficiency, power density, and smaller form factors are the main demands of the community. Silicon MOSFETs have reached their theoretical limits for power electronics, and with board space at a premium, power system designers need alternatives. Gallium nitride (GaN) is a high-electron-mobility transistor (HEMT) semiconductor that is adding real value in emerging applications.

EETimes
August, 2020
Read article

These new generation 200 V eGaN^® FETs are ideal for 48 V_OUT synchronous rectification, class-D audio, solar microinverters and optimizers, and multilevel, high-voltage AC/DC converters

EL SEGUNDO, Calif.— August, 2020 — EPC, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, advances the performance capability while lowering the cost of off-the-shelf gallium nitride transistors with the introduction of the EPC2215 and EPC2207 200 V eGaN FETs.  The applications for these leading-edge devices include class D audio, synchronous rectification, solar MPPTs (maximum power point tracker), DC-DC converters (hard-switched and resonant), and multilevel high voltage converters.

In this second part of EEWorld’s “virtual roundtable” discussion on Class D audio, our panelists delve into the impact that the emergence of gallium-nitride (GaN) is having on Class D designs: Where are silicon devices still dominant? What are the performance benefits of using GaN in Class D amplifiers? And what are the anticipated future trends of GaN versus Silicon in Class D amplifiers? Joining us for this virtual roundtable are Joshua LeMaire (JL), Audio Systems Architect at Analog Devices; Steve Colino (SC), Vice President Strategic Technical Sales with Efficient Power Conversion; and Jens Tybo Jensen (JTJ), Head of Application Engineering for Class D Audio at Infineon Technologies.

EEWorld Online
July, 2020
Read article

Starting on page 13 of this story, EPC discusses with David Morrison the latest GaN developments meant for APEC. Alex Lidow, CEO and co-founder of EPC, discussed his company’s new power stage ICs, their development of GaN-based reference designs using a multi-level topology and various demos that were originally bound for APEC.

How2Power Today
April, 2020
Read article

EPC has posted additional modules to the educational video podcast series focusing on reliability and leading-edge applications including high-density computing for Artificial Intelligence (AI), lidar for robots, drones, and cars, and Class-D audio using gallium nitride FETs and ICs.

EL SEGUNDO, Calif. – April 2020 – Efficient Power Conversion (EPC) Corporation has posted an update to its popular “How to GaN” video podcast series. The six videos included in the current release of the series provide practical examples to help designers employ GaN technology to create state-of-the-art DC-DC converters for AI servers and ultra-thin laptops, lidar for robots, drones, and autonomous cars, and audio systems with the highest quality acoustics possible.

Efficient Power Conversion (EPC) introduces the first of a new integrated circuit (IC) product family offering higher performance and smaller solution size for high power density applications including DC-DC conversion, motor drive, and Class-D audio.

EL SEGUNDO, Calif.— March 2020 — EPC announces the introduction of an 80 V, 12.5 A power stage integrated circuit designed for 48 V DC-DC conversion used in high-density computing applications and in motor drives for e-mobility.

Ultra-fast transition eGaN^® FETs from Efficient Power Conversion (EPC) on the EPC9144 drive high current pulses up to 28 A with pulse widths as low as 1.2 ns, enhancing the accuracy, precision, and processing speed of ToF and flash lidar systems.

EL SEGUNDO, Calif.— January, 2020 — EPC announces the availability of the EPC9144, a 15 V, 28 A high current pulsed laser diode driver demonstration board.

Within the EPC hospitality suite at the Venetian hotel, world-changing innovations and gallium nitride (GaN) will go hand in hand. A variety of demonstrations will showcase GaN’s higher efficiency, smaller size, and lower cost solutions.

EL SEGUNDO, Calif. — December 2019 — Efficient Power Conversion (EPC) announced that it will be demonstrating the power of eGaN^® technology to enhance game-changing consumer applications including self-driving cars, robots, drones, wireless power, world-class audio and cutting-edge automotive solutions – at the 2020 Consumer Electronics Show (CES) in Las Vegas, January 7^th through the 10^th.