新製品発表、アプリケーション関連情報など、EPCからの最新ニュースと最新情報を得るために、今、登録してください。 EPCからの電子メール配信に登録する
Gallium nitride has long been known to have useful properties when it comes to electronic components. Even so, its application has largely been confined to more exotic areas of the industry, particularly rf transistors.
But GaN is beginning to find application in what could be considered the mainstream, with some of its proponents suggesting its arrival could mark the beginning of the end for the traditional power mosfet.
By: Graham Pitcher
New Electronics
December 13, 2011
Read the article
続きを読む
EPC9101 demonstrates size reduction and efficiency enhancement for buck power conversion achieved using high frequency switching eGaN power transistors
EL SEGUNDO, Calif.—October 2011 — Efficient Power Conversion Corporation (EPC) introduces the EPC9101, a fully functional buck power conversion demonstration circuit. This board is an 8 V-19 V input to 1.2 V, 18 A maximum output current, 1MHz buck converter. It uses the EPC2014 and EPC2015 eGaN FETs in conjunction with the recently introduced National LM5113 100V half-bridge gate driver from Texas Instruments. The LM5113 is the industry’s first driver designed specifically for enhancement mode gallium nitride FETs. The EPC9101 demonstrates the reduced size and performance capabilities of high switching frequency eGaN FETs when coupled with this dedicated eGaN driver.
続きを読む
EPC has received ISO certification for the design, development, marketing and sales of gallium nitride power transistors and power management devices
EL SEGUNDO, Calif. – September 2011 - Efficient Power Conversion Corporation (www.epc-co.com) the leader in energy-efficient enhancement mode gallium nitride (eGaN®) power transistors used in power conversion applications, has received the International Organization for Standardization ISO 9001:2008 certification for its quality management system.
続きを読む
EPC9006 facilitates rapid design of high frequency switching power conversion systems based on the 100 V EPC2007 with a ready-made and easy-to-connect development board including well-documented engineering support materials.
EL SEGUNDO, Calif.—September, 2011 — Efficient Power Conversion Corporation (EPC) introduces the EPC9006 development board to make it easier for engineers to start designing with a 100 V enhancement-mode gallium nitride (eGaN) field effect transistor (FET) in applications such as high-speed DC-DC power supplies, point-of-load converters, class D audio amplifiers, hard-switched and high frequency circuits.
続きを読む
EPC2007 delivers high frequency switching with enhanced performance in lead-free, RoHS compliant package.
EL SEGUNDO, Calif. – September, 2011 - Efficient Power Conversion Corporation (www.epc-co.com) announces the introduction of the EPC2007 as the newest member of EPC’s second-generation enhanced performance eGaN FET family. The EPC2007 is environmentally friendly; being lead free, RoHS-compliant (Restriction of Hazardous Substances), and halogen free.
続きを読む
EPC9005 facilitates rapid design of high frequency switching power conversion systems based on the 40 V EPC2014 with a ready-made and easy-to-connect development board including well-documented engineering support materials.
EL SEGUNDO, Calif.—August 2011 — Efficient Power Conversion Corporation (EPC) introduces the EPC9005 development board to make it easier for users to start designing with a 40 V enhancement-mode gallium nitride (eGaN) field effect transistor (FET) in applications such as high-speed DC-DC power supplies, point-of-load converters, class D audio amplifiers, hard-switched and high frequency circuits.
続きを読む
Wide-bandgap materials, such as GaN and SiC, are enabling a new generation of power switching devices that switch faster and with fewer losses than the venerable silicon MOSFET, resulting in smaller, more efficient power supplies.
By Margery Conner
EDN
August 25, 2011
Read the article
続きを読む
EPC2014 delivers high frequency switching with enhanced performance in lead-free, RoHS compliant package.
EL SEGUNDO, Calif. – August 2011 - Efficient Power Conversion Corporation (www.epc-co.com) announces the introduction of the EPC2014 as the newest member of EPC’s second-generation enhanced performance eGaN FET family. The EPC2014 is environmentally friendly; being lead free, RoHS-compliant (Restriction of Hazardous Substances), and halogen free.
続きを読む
The EPC9004 has been recognized by Bodo’s Power Systems as the Product of the Month in the September, 2011 issue of the magazine. The EPC9004 facilitates rapid design of high frequency switching power conversion systems based on the 200 V EPC2012 with a ready-made, easy to connect development board.
Bodo's Power Systems
September, 2011
Read the article
続きを読む
EPC2012 delivers high frequency switching with enhanced performance in lead-free, RoHS compliant package.
EL SEGUNDO, Calif. – August 2011 - Efficient Power Conversion Corporation (www.epc-co.com) announces the introduction of the EPC2012 as the newest member of EPC’s second-generation enhanced performance eGaN FET family. The EPC2012 is environmentally friendly; being lead free, RoHS-compliant (Restriction of Hazardous Substances), and halogen free.
続きを読む
EPC9004 facilitates rapid design of high frequency switching power conversion systems based on the 200 V EPC2012 with a ready-made, easy to connect development board and well-documented engineering support materials.
EL SEGUNDO, Calif.—August 2011 — Efficient Power Conversion Corporation (EPC) today announced the introduction of the EPC9004 development board to make it easier for users to start designing with EPC’s 200 V enhancement-mode gallium nitride (eGaN) field effect transistor (FET) in applications such as solar microinverters, class D audio amplifiers, Power over Ethernet (PoE), and synchronous rectification.
続きを読む
高度集成的半桥栅极驱动器提高了高压应用的功率密度和效率
EEFocus
閱讀全文
続きを読む
We know Efficient Power Conversion (EPC) has commercialized enhancement-mode GaN-on-Si FETs, or eGaN FETs as EPC calls them, for more than a year now. Concurrently, it has been working with partners to realize dedicated drivers for its eGaN FETs, which offer lower RDS(ON) at higher voltages, lower gate charge, and no reverse recovery loss (QRR)—all these properties from a smaller die size than silicon. In essence, by comparison to silicon MOSFETs, the eGaN FETs offer a dramatic reduction in figures of merit or FOM.
By Ashok Bindra
How2Power
June, 2011
Read the article
続きを読む
GaN (Gallium-Nitride) FETs appear poised to eat into silicon FETs market share as switching devices for high-voltage power conversion circuits.
By Margery Conner
EDN
June 20, 2011
Read the article
続きを読む
National Semiconductor Corp. (NYSE:NSM) today introduced the industry’s first 100V half-bridge gate driver optimized for use with enhancement-mode Gallium-Nitride (GaN) power field-effect transistors (FETs) in high-voltage power converters. Enhancement-mode GaN FETs enable new levels of efficiency and power density compared to standard metal-oxide semiconductor field-effect transistors (MOSFETs) due to their low on-resistance (Rdson) and gate charge (Qg) as well as their ultra-small footprint, but driving them reliably presents significant new challenges. National’s LM5113 driver integrated circuit (IC) eliminates these challenges, enabling power designers to realize the benefits of GaN FETs in a variety of popular power topologies.
Read article
続きを読む
EL SEGUNDO, Calif-May 4, 2011 — Efficient Power Conversion Corporation’s (EPC) family of enhancement-mode gallium nitride on silicon (eGaN®) power FETs has won the Energy Technology Award issued as part of the prestigious EE Times Annual Creativity in Electronics (ACE) Awards. These awards celebrate the creators of technology who demonstrate leadership and innovation in the global industry and shape the world we which we live.
“We are very proud to have won the ACE Award. This award substantiates that EPC’s enhancement-mode GaN power transistors represent a major breakthrough in power conversion technology. We believe that performance from silicon-based MOSFETs has reached the end of the road and that eGaN technology will lead the way for continued increases in performance in power management.” said Alex Lidow, EPC’s co-founder and Chief Executive Officer.
続きを読む
Microsemi is working with Efficient Power Conversion (EPC) www.epc-co.com in the development of a complete line of high performance FETS for high reliability space and military applications. A jointly researched paper entitled "Enhancement Mode Gallium Nitride Characteristics Under Long Term Stress" will be presented at the Government Microcircuit Applications and Critical Technology Conference (GOMAC), March 21-24, 2011 in Orlando, Florida. The study covers the reliability testing results and demonstrates the stability of the devices at temperature and under radiation exposure.
Read the article
続きを読む
Alex Lidow is interviewed by ECN's Editorial Director, Alix Paultre, on the Tinker's Toolbox, ECN's audio interview website. The interview explores the attributes of GaN technology, applications opened as a result of GaN's superior performance to MOSFETs and reasons for the take-up of eGaN FET products over the past year.
Listen to Interview
続きを読む
EL SEGUNDO, Calif. - March 15, 2011 - Efficient Power Conversion Corporation (www.epc-co.com) announce the introduction of the EPC2001 and EPC2015, two lead-free, RoHS-compliant (Restriction of Hazardous Substances) enhancement-mode gallium nitride on silicon (eGaN™) FETs.
The EPC2001 FET is a 100 VDS device with a maximum RDS(ON) of 7 milliohms with 5 V applied to the gate, and the EPC2015 is a 40 VDS with a maximum RDS(ON) of 4 milliohms. Both eGaN FETs provide significant performance advantages over similar state-of-the-art silicon-based power MOSFETs. Both devices have low on resistance, are smaller than silicon devices with similar resistance and have many times superior switching performance.
続きを読む