eGaN FETは、全動作範囲にわたって正の温度係数を示し、シリコンMOSFETの性能限界を超えます。

エフィシエント・パワー・コンバージョン社（EPC：Efficient Power Conversion Corporation）は2012年9月3日、eGaN FETの製品ライン全体で安全動作領域（SOA）データを公開したと発表しました。事実上、全動作範囲にわたって正の温度係数なので、平均デバイス温度によってのみ制限された正方形のSOAが得られます。

Superior switching speeds of EPC’s eGaN FETs increases the efficiency of power electronics for highly resonant wireless power transfer.

EL SEGUNDO, Calif.—August 13, 2012 — Efficient Power Conversion Corporation (EPC) today announced a high efficiency wireless power demonstration system utilizing the high frequency switching capability of gallium nitride transistors. eGaN FETs from EPC are an ideal solution for these systems because of their ability to operate efficiently at high frequency, voltage, and power.

EPC9102 showcases the performance that can be achieved using the EPC2001 eGaN FETs and the LM5113 eGaN FET driver from Texas Instruments

EL SEGUNDO, Calif.—May, 2012 — Efficient Power Conversion Corporation (EPC) introduces the EPC9102, a fully functional eighth brick converter. This board is a 36 V – 60 V input to 12 V output, 375 kHz phase-shifted full bridge (PSFB) eighth brick converter with 17 A maximum output current. The EPC9102 uses the 100 V EPC2001 eGaN FETs in conjunction with the recently introduced LM5113 100V half-bridge gate driver from Texas Instruments. The LM5113 is the industry’s first driver to optimally drive and fully release the benefits of enhancement mode gallium nitride FETs. The EPC9102 demonstrates the performance capabilities of high switching frequency eGaN FETs when coupled with this eGaN driver.

Dr. Reusch will be creating benchmark power converter designs and assisting customers in the use of eGaN FETs® for high frequency, high performance power conversion systems

EL SEGUNDO, Calif.—May 2012 — Efficient Power Conversion Corporation (EPC) is proud to announce that Dr. David Reusch has joined the EPC engineering team as Director, Applications Engineering.

As a member of the EPC applications team, Dr. Reusch’s focus will be on designing lower loss and higher power density benchmark circuits that demonstrate the benefits of using gallium nitride transistors. His initial focus will be on their use in higher voltage DC-DC converters and resonant, soft-switching converters. Dr. Reusch’s research and experience in these applications will be shared with customers to accelerate their designs using high performance eGaN FETs. His designs will demonstrate GaN transistors’ superior performance over MOSFETs.

EL SEGUNDO, Calif.—May, 2012 — Efficient Power Conversion Corporation (EPC) CEO Alex Lidow will speak at the private Credit Suisse investor conference in San Francisco on Tuesday, May 22, at 10:00 a.m. Pacific time. Dr. Lidow will discuss the growing market for gallium nitride transistors with a focus on EPC’s eGaN® FET technology and products. As a displacement technology, GaN FETs can be used in an array of current MOSFET applications in addition to enabling new high volume applications, such as wireless power and envelope tracking, a method for significant energy savings in communication devices.

EL SEGUNDO, Calif. – April, 2012 - Efficient Power Conversion Corporation, (www.epc-co.com) the leader in enhancement mode gallium nitride FET technology, announces today that it has been recognized with inclusion in the EE Times Silicon 60 list of 60 Emerging Startups. Companies are selected by the editorial team at EE Times based on a mix of criteria including: technology, intended market, maturity, financial position, investment profile, and executive leadership.

"It is an honor to receive this recognition from EE Times as one of the hottest emerging electronics companies and as EE Times has noted, 'an emerging company worthy of tracking,'" commented Alex Lidow, CEO, Efficient Power Conversion Corporation.

Texas Instruments Incorporated (TI) introduced a low-side gate driver for use with MOSFETs and Gallium-Nitride (GaN) power field-effect transistors (FETs) in high-density power converters. The new LM5114 drives GaN FETs and MOSFETs in low-side applications, such as synchronous rectifiers and power factor converters. Together with the LM5113, the industry's first 100-V half-bridge GaN FET driver announced in 2011, the family provides a complete isolated DC/DC conversion driver solution for high-power GaN FETs and MOSFETs used in high-performance telecom, networking and data center applications. For more information, samples and an evaluation board, visit www.ti.com/gan

Written by industry experts, "GaN Transistors for Efficient Power Conversion" provides both theory and applications for gallium nitride transistors

EL SEGUNDO, Calif. - January 2012 - Efficient Power Conversion Corporation (www.epc-co.com) announces the publication of a textbook designed to provide power system design engineers basic technical and application-focused information on how to design more efficient power conversion systems using gallium nitride-based transistors.

EL SEGUNDO, Calif-January 3, 2012 — The National LM5113 from Texas Instruments has been honored with an Electronic Products’ Product of the Year award. The editors of Electronic Products — a leading trade publication for electronic design engineers — evaluated thousands of products launched in 2011. The winning products were selected on the basis of innovative design, significant advancement in technology or application and substantial achievement in price and performance.

The LM5113 is the industry’s first driver designed specifically for enhancement mode gallium nitride FETs. Enhancement-mode GaN FETs enable new levels of efficiency and power density compared to standard metal-oxide semiconductor field-effect transistors (MOSFETs) due to their low on-resistance (Rdson) and gate charge (Qg) as well as their ultra-small footprint, but driving them reliably presented new challenges. National’s LM5113 driver integrated circuit (IC) overcomes these challenges, enabling power designers to realize the benefits of GaN FETs in a variety of popular power topologies.

"We congratulate Texas Instruments on this prestigious award," said Alex Lidow, co-founder and CEO for Efficient Power Conversion Corporation. "The release of the LM5113 bridge driver has been instrumental in accelerating the adoption of our eGaN® FETs by offering designers a true plug and play solution. The LM5113 bridge driver unlocks the efficiency capability of eGaN FETs, enabling designers to achieve new performance benchmarks in power and system density."

http://www2.electronicproducts.com/Driving_GaN_FETs_becomes_reality-article-poypo_TI_NatSemi_jan2012-html.aspx

EPC9101 demonstrates size reduction and efficiency enhancement for buck power conversion achieved using high frequency switching eGaN power transistors

EL SEGUNDO, Calif.—October 2011 — Efficient Power Conversion Corporation (EPC) introduces the EPC9101, a fully functional buck power conversion demonstration circuit. This board is an 8 V-19 V input to 1.2 V, 18 A maximum output current, 1MHz buck converter. It uses the EPC2014 and EPC2015 eGaN FETs in conjunction with the recently introduced National LM5113 100V half-bridge gate driver from Texas Instruments. The LM5113 is the industry’s first driver designed specifically for enhancement mode gallium nitride FETs. The EPC9101 demonstrates the reduced size and performance capabilities of high switching frequency eGaN FETs when coupled with this dedicated eGaN driver.

EPC has received ISO certification for the design, development, marketing and sales of gallium nitride power transistors and power management devices

EL SEGUNDO, Calif. – September 2011 - Efficient Power Conversion Corporation (www.epc-co.com) the leader in energy-efficient enhancement mode gallium nitride (eGaN®) power transistors used in power conversion applications, has received the International Organization for Standardization ISO 9001:2008 certification for its quality management system.

EPC9006 facilitates rapid design of high frequency switching power conversion systems based on the 100 V EPC2007 with a ready-made and easy-to-connect development board including well-documented engineering support materials.

EL SEGUNDO, Calif.—September, 2011 — Efficient Power Conversion Corporation (EPC) introduces the EPC9006 development board to make it easier for engineers to start designing with a 100 V enhancement-mode gallium nitride (eGaN) field effect transistor (FET) in applications such as high-speed DC-DC power supplies, point-of-load converters, class D audio amplifiers, hard-switched and high frequency circuits.

EPC2007 delivers high frequency switching with enhanced performance in lead-free, RoHS compliant package.

EL SEGUNDO, Calif. – September, 2011 - Efficient Power Conversion Corporation (www.epc-co.com) announces the introduction of the EPC2007 as the newest member of EPC’s second-generation enhanced performance eGaN FET family. The EPC2007 is environmentally friendly; being lead free, RoHS-compliant (Restriction of Hazardous Substances), and halogen free.

EPC9005 facilitates rapid design of high frequency switching power conversion systems based on the 40 V EPC2014 with a ready-made and easy-to-connect development board including well-documented engineering support materials.

EL SEGUNDO, Calif.—August 2011 — Efficient Power Conversion Corporation (EPC) introduces the EPC9005 development board to make it easier for users to start designing with a 40 V enhancement-mode gallium nitride (eGaN) field effect transistor (FET) in applications such as high-speed DC-DC power supplies, point-of-load converters, class D audio amplifiers, hard-switched and high frequency circuits.

EPC2014 delivers high frequency switching with enhanced performance in lead-free, RoHS compliant package.

EL SEGUNDO, Calif. – August 2011 - Efficient Power Conversion Corporation (www.epc-co.com) announces the introduction of the EPC2014 as the newest member of EPC’s second-generation enhanced performance eGaN FET family. The EPC2014 is environmentally friendly; being lead free, RoHS-compliant (Restriction of Hazardous Substances), and halogen free.

EPC2012 delivers high frequency switching with enhanced performance in lead-free, RoHS compliant package.

EL SEGUNDO, Calif. – August 2011 - Efficient Power Conversion Corporation (www.epc-co.com) announces the introduction of the EPC2012 as the newest member of EPC’s second-generation enhanced performance eGaN FET family. The EPC2012 is environmentally friendly; being lead free, RoHS-compliant (Restriction of Hazardous Substances), and halogen free.

EPC9004 facilitates rapid design of high frequency switching power conversion systems based on the 200 V EPC2012 with a ready-made, easy to connect development board and well-documented engineering support materials.

EL SEGUNDO, Calif.—August 2011 — Efficient Power Conversion Corporation (EPC) today announced the introduction of the EPC9004 development board to make it easier for users to start designing with EPC’s 200 V enhancement-mode gallium nitride (eGaN) field effect transistor (FET) in applications such as solar microinverters, class D audio amplifiers, Power over Ethernet (PoE), and synchronous rectification.

National Semiconductor Corp. (NYSE:NSM) today introduced the industry’s first 100V half-bridge gate driver optimized for use with enhancement-mode Gallium-Nitride (GaN) power field-effect transistors (FETs) in high-voltage power converters. Enhancement-mode GaN FETs enable new levels of efficiency and power density compared to standard metal-oxide semiconductor field-effect transistors (MOSFETs) due to their low on-resistance (Rdson) and gate charge (Qg) as well as their ultra-small footprint, but driving them reliably presents significant new challenges. National’s LM5113 driver integrated circuit (IC) eliminates these challenges, enabling power designers to realize the benefits of GaN FETs in a variety of popular power topologies.

Read article

EL SEGUNDO, Calif-May 4, 2011 — Efficient Power Conversion Corporation’s (EPC) family of enhancement-mode gallium nitride on silicon (eGaN®) power FETs has won the Energy Technology Award issued as part of the prestigious EE Times Annual Creativity in Electronics (ACE) Awards. These awards celebrate the creators of technology who demonstrate leadership and innovation in the global industry and shape the world we which we live.

“We are very proud to have won the ACE Award. This award substantiates that EPC’s enhancement-mode GaN power transistors represent a major breakthrough in power conversion technology. We believe that performance from silicon-based MOSFETs has reached the end of the road and that eGaN technology will lead the way for continued increases in performance in power management.” said Alex Lidow, EPC’s co-founder and Chief Executive Officer.

Microsemi is working with Efficient Power Conversion (EPC) www.epc-co.com in the development of a complete line of high performance FETS for high reliability space and military applications. A jointly researched paper entitled "Enhancement Mode Gallium Nitride Characteristics Under Long Term Stress" will be presented at the Government Microcircuit Applications and Critical Technology Conference (GOMAC), March 21-24, 2011 in Orlando, Florida. The study covers the reliability testing results and demonstrates the stability of the devices at temperature and under radiation exposure.

Read the article