With Electronic Power Steering (EPS), the hydraulic system is replaced with an electric motor that aids the driver only when needed. Its digital assistance control can be modified online to adapt to driving conditions. There are, however, several design constraints to consider. One is that the driver does not want to lack the haptic feedback from the tires, especially when a vehicle is large, such as a truck. Other constraints are determined by safety regulations, particularly for automatic guided vehicles. These constraints require adopting an efficient, accurate and redundant system. Gallium nitride technology helps the designers in all these areas.

Power Electronics News
March, 2023
Read article

With the increase in government mandates to combat climate change, automakers are moving quickly to leverage new technology to respond by switching from the internal combustion engine to electric-drive vehicles. This article presents the design of a 2 kW, two-phase 48 V/12 V bi-directional converter using GaN FETs that achieves 96% efficiency and is targeted for the 48 V mild hybrid system.

PSD North America
March, 2023
Read article

An exploration of a GaN-based design of a 2 kW 48V/12V bi-directional power module for 48 V mild hybrid electric vehicles.

Electronics Today
January, 2023
Read article

Richtek, the global leading analog IC design company has teamed up with EPC, the leading provider of gallium nitride (GaN)-based power management technology to launch a new reference design for fast charging applications, achieving high power density and up to 98% efficiency.

DigiTimes
January, 2023
Read article

Despite the continued progress in traditional transistor scaling, the semiconductor industry has reached an inflection point. The demand for faster, smaller, smarter, and more energy-efficient chips calls for new design and manufacturing paradigms. This eBook includes contributions from technology and market experts Malcolm Penn, Future Horizons; Tim Burgess and Bernd Westhoff, Renesas Electronics; Jean-Christophe Eloy, Yole Group; Luc Van den hove, imec; Ezgi Dogmus, Poshun Chiu, and Taha Ayari, Yole Intelligence; Alex Lidow, Efficient Power Conversion; Victor Veliadis, PowerAmerica; Richard Collins and Yu-Han Chang, IDTechEx; and Jean-René Lèquepeys, CEA-Leti.

EETimes
December, 2022
More information

Growing computational power and miniaturization of electronics in computing and data centers is increasingly putting pressure on 48-V power delivery and conversion systems. High-efficiency and high-power–density converters enable a reduction in power losses at the system level while allowing smaller form factors. In this context, LLC resonant topologies combined with GaN technology succeed to deliver outstanding performance, as it has been demonstrated with multiple examples. This article will show the key design parameters and components to achieve beyond 4 kW/in3 of power density in a 48-V to 12-V LLC converter using eGaN^® FETs.

Power Electronics News
December, 2022
Read article

This paper deals with the application of the latest generation low voltage (up to 80 V) Gallium Nitride (GaN) devices for motor drive applications in the field of electric micro-mobility. A two-level inverter topology oriented to light electric traction (such as electric scooters) with a power rate of 1500 W has been considered. An experimental board using two GaN FETs in parallel connection for each switch of an inverter leg has been arranged. The intrinsic parameters spread of the device, as well as the leakage inductances of both the circuit and the PCB, to evaluate the impact on the current share during both the transient phase and in the steady state have been investigated. In the paper, several simulation runs have been carried out and described. Furthermore, the inverter experimental board has been used to evaluate the phase voltages and currents at different load conditions. Finally, the temperature limits versus phase current variation have been evaluated.

IEEE 2022 AEIT International Annual Conference (AEIT)
Read article

Note: This site requires IEEE membership to access full paper.

In this article EPC explains the improved performance in their Gen 6 GaN FETs and how the resulting devices can achieve the same R_DS(on) as previous generation devices in die that are half the size.

How2Power
November, 2022
Read article

With increasing legislation aimed at higher fuel efficiency standards, vehicle manufacturers are searching for cost-effective solutions to meet these demands while still providing the power required for ever-increasing electronically driven functions.  This article details a bi-directional high power converter for mild-hybrid cars and battery backup units using GaN FETs to achieve efficiency exceeding 96% when converting from 48 V to 14.3 V at 500 kHz switching frequency.

Power Electronics Europe
Read article

From Nov. 15 to 18, electronica 2022 will bring the international electronics industry together at the Munich exhibition grounds. Wide Bandgap Semiconductors, Renewable Energies, Smart Grid, and Energy Storage will be the major topics covered by the Power Electronics Forum at electronica 2022. In this podcast, onsemi president and CEO Hassane El-Khoury, Silanna Semiconductor North America CEO Mark Drucker, and of Efficient Power Conversion (EPC) CEO Alex Lidow will introduce the Power Electronics Forum. Interview with Alex Lidow starts at 31:55

EETimes
Listen to podcast

GaN devices have gone from initial R&D to mainstream designs over the last 15 years. Unfortunately, there are many misunderstandings left-over from those early-stage bipolar drive circuit developments or dead-end technology branches. One of the most pernicious is the topic of bipolar drive. In actuality, unipolar drives are the best way to drive eGaN^® FETs.

Power Electronics Tips
October, 2022
Read article

Gallium nitride devices are leading the innovation in power conversion. The benefits of GaN-based inverters are becoming increasingly evident in motor drive applications.

Power Electronics News
October, 2022
Read article

As the level of automation increases in machines, detailed awareness of the surroundings becomes necessary. Time-of-flight based 3D imaging systems have become the eyes of machines. eGaN^® technology has been the workhorse of laser drivers for these systems, enabling the resolution to make intelligent decisions.

Bodo’s Power Systems
October, 2022
Read article

In this article, different power loop layouts are analyzed with simultaneous considerations for thermal management and electric parasitics.

The results show that an improved layout can provide a significant reduction in operating temperature rise while maintaining electrical performance benefits.

EE Power
October, 2022
Read Article

There is a commonly held belief in the industry that GaN devices are wasted on inverters for electric motors. After all, if the performance of the system is restricted by the use of a 20KHz PWM, then there can be little benefit in using a material that gains the majority of its advantages from faster switching speeds. However, according to Marco Palma, Director of Motor Drives Systems and Applications at EPC, there are some ways that GaN can still prove effective in that role.

Power Systems Design
September, 2022
Read Article

EPC’s inverter reference design is based around a GaN chip to reduce powertrain sizes

E-mobility Engineering
September, 2022
Read Article

GaN FETs in thermally enhanced QFN packages offer higher performance and smaller solution size for high power density applications, including DC-DC conversion, AC/DC chargers, solar optimizers and microinverters, motor drives, and Class D Audio

Power Electronics News
September, 2022
Read article

Easy Engineering媒体采访了宜普电源转换公司（EPC）的市场营销总监Renee Yawger，了解目前氮化镓器件应用的情况和氮化镓技术的未来。

Easy Engineering
2022年5月
阅读文章

One way to tell when a new technology has passed the tipping point of adoption is by the voices advocating the status quo. The more conservative voices tend to cite older information that, given the fast change of trajectory that occurs at a tipping point, can lead to poor decisions for new designs. In the world of GaN power devices the tipping point occurred in the past two years when the rate of new GaN-based designs started to double year-on-year, and the legacy MOSFET designs started to face critical supply shortages due to their finely tuned, but less flexible supply chains. GaN devices, on the other hand, have remained in stock at most major distributors due to their relatively new and flexible supply chains utilizing older silicon foundries, but affording these foundries a new and vibrant future. In this article we will address some of the common misconceptions still showing up in articles and at conferences, usually presented by advocates of the status quo.

Bodo’s Power Systems
May, 2022
Read article

氮化镓场效应晶体管和集成电路的用户现在有了一个工具来确定应用中需要的降额和降额设计中应考虑的因素。宜普公司开发了一个基于第一原理的物理模型，以解释氮化镓晶体管在硬开关时，导通电阻如何上升。本文提供了两个同步整流应用实例的演示。

Electronic Specifier
2022年5月
阅读文章