EPC9112 : A4WP compatible, ZVS Class-D
Wireless Power System
EPC9112 is complete demonstration kit for an A4WP compatible, ZVS Class-D wireless power system operating at
6.78 MHz
The EPC9112 wireless power system comprises three boards:
1) A Source Board (Transmitter or Power
Amplifier) EPC9507
2)
A Class 3 A4WP compatible Source Coil (Transmit Coil)
3) A Category 3 A4WP compatible Device Coil with
rectifier and DC smoothing capacitor.
The EPC9112 wireless power demonstration system is a high efficiency, A4WP compatible, Zero Voltage Switching
(ZVS), Voltage Mode class-D wireless power transfer demonstration kit capable of delivering up to 35 W into
a DC load while operating at 6.78 MHz (Lowest ISM band). The purpose of this demonstration system is to
simplify the evaluation process of wireless power technology using eGaN® FETs. The EPC9112
wireless power system comprises the three boards (shown in Figure 1) namely: 1) A Source Board (Transmitter
or Power Amplifier) EPC9507 2) A Class 3 A4WP compatible Source Coil (Transmit Coil) 3) A
Category 3 A4WP compatible Device Coil with rectifier and DC smoothing capacitor.
The amplifier board features the EPC2007C and EPC2038 enhancement mode field effect transistors (FET) in an optional
half-bridge topology (single ended configuration) or default full-bridge topology (differential
configuration), and includes the gate driver/s and oscillator that ensures operation of the system at 6.78
MHz. This revision of the wireless demonstration amplifier includes a synchronous bootstrap FET supply for
the upper FETs of the ZVS class-D amplifier that eliminates the reverse recovery losses of the gate driver’s
internal bootstrap diode that dissipates energy in the upper FET. This circuit has been implemented using
the new EPC2038 eGaN FET
specifically designed for this function.