EPC’s inverter reference design is based around a GaN chip to reduce powertrain sizes

E-mobility Engineering
September, 2022
Read Article

GaN FETs in thermally enhanced QFN packages offer higher performance and smaller solution size for high power density applications, including DC-DC conversion, AC/DC chargers, solar optimizers and microinverters, motor drives, and Class D Audio

Power Electronics News
September, 2022
Read article

Efficient Power Conversion (EPC) introduces the 100 V, 3.8 mΩ EPC2306 GaN FET, offering higher performance and smaller solution size for high power density applications including DC-DC conversion, AC/DC chargers, solar optimizers and microinverters, motor drives, and Class D Audio.

EL SEGUNDO, Calif.— September 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (eGaN^®) power FETs and ICs, expands the selection of off-the-shelf GaN FETs in thermally enhanced QFN packages with the introduction of the 100 V EPC2306 designed for 48 V DC-DC conversion used in high-density computing applications, in 48 V BLDC motor drives for e-mobility and robotics, and in solar optimizers and microinverters, and Class D Audio.

Efficient Power Conversion (EPC) introduces the latest ePower™ Stage IC that integrates a complete GaN half-bridge power stage capable of up to 35 A at 1 MHz operation offering higher performance and smaller solution size for high power density applications including DC-DC conversion, motor drives, and class-d audio amplifiers.

EL SEGUNDO, Calif.— August 2022 — EPC announces the introduction of a 100 V, 35 A integrated circuit designed for 48 V DC-DC conversion used in high-density computing applications and in 48 V BLDC motor drives for e-mobility, robotics, and drones.  

Efficient Power Conversion (EPC) expands its family of radiation-hardened (rad-hard) gallium nitride (GaN) products for power conversion solutions in critical spaceborne and other high-reliability environments with the addition of a fifth rad hard device to the product family.

EL SEGUNDO, Calif.— June 2022 — EPC announces the introduction of the EPC7004 radiation-hardened GaN FET. The EPC7004 is a 100 V, 7 mΩ, 160 A_Pulsed, rad-hard GaN FET in a small 6.56 mm² footprint. The EPC7004 has a total dose radiation rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm²). The EPC7004, along with the rest of the Rad Hard family, EPC7014, EPC7007, EPC7019, EPC7018, are offered in a chip-scale package, the same as the commercial eGaN^® FET and IC family.  Packaged versions will be available from EPC Space.

Efficient Power Conversion (EPC) expands its family of radiation-hardened (rad-hard) gallium nitride (GaN) products for power conversion solutions in critical spaceborne and other high-reliability environments with a 100 V device that has the lowest on-resistance of any 100 V rad hard transistor currently available on the market.

EL SEGUNDO, Calif.— June 2022 — EPC announces the introduction of the EPC7018 radiation-hardened GaN FET. The EPC7018 is a 100 V, 3.9 mΩ, 345 A_Pulsed, rad-hard GaN FET in a small 13.9 mm² footprint. The EPC7018 has a total dose radiation rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm²). The EPC7018, along with the rest of the Rad Hard family, EPC7014, EPC7007, EPC7019, are offered in a chip-scale package, the same as the commercial eGaN^® FET and IC family.  Packaged versions will be available from EPC Space.

The EPC9173 GaN-based inverter reference design enhances motor system size, performance, range, precision, torque, all while simplifying design for faster time-to-market. The extremely small size of this inverter allows integration into the motor housing resulting in the lowest EMI, highest density, and lowest weight.

EL SEGUNDO, Calif.— June, 2022 — EPC announces the availability of the EPC9173, a 3-phase BLDC motor drive inverter using the EPC23101 eGaN^® IC with embedded gate driver function and a floating power GaN FET with 3.3 mΩ R_DS(on). The EPC9173 operates from an input supply voltage between 20 V and 85 V and can deliver up to 50 Apk (35 A_RMS). This voltage range and power level makes the solution ideal for a variety of motor drive applications including e-bikes, scooters, city cars, drones, and robotics.

EPC introduces the 40 V, 1.1 mΩ EPC2066 GaN FET, offering designers a significantly smaller and more efficient device than silicon MOSFETs for high-performance, space-constrained applications.

EL SEGUNDO, Calif. — May 2022 — Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride (eGaN^®) power FETs and ICs, expands the selection of low voltage, off-the-shelf gallium nitride transistors with the introduction of the EPC2066 (0.8 mΩ typical, 40 V) GaN FET. 

Efficient Power Conversion (EPC) expands its family of radiation-hardened (rad-hard) gallium nitride (GaN) products for power conversion solutions in critical spaceborne and other high-reliability environments with a 200 V device that boasts an ultra-low on-resistance and a tiny footprint.

EL SEGUNDO, Calif.— April 2022 — EPC announces the introduction of the EPC7007 radiation-hardened GaN FET. The EPC7007, a 200 V, 25 mΩ, 80 A_Pulsed, rad-hard GaN FET in a small 5.76 mm² footprint. The EPC7007 has a total dose rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm²). These devices are offered in a chip-scale package, the same as the commercial eGaN FET and IC family.  Packaged versions will be available from EPC Space.

EPC’s GaN Experts will be available during PCIM Europe 2022, exhibiting various demonstrations of how GaN technology’s superior performance is transforming the delivery of power across many industries, including computing, communications, and emobility.

EL SEGUNDO, Calif. — April 2022 — The EPC team will be delivering multiple technical presentations on gallium nitride (GaN) technology and applications at PCIM Europe 2022 in Nuremburg, 10 – 12 May (see detailed schedule below). In addition, the company will demonstrate its latest eGaN^® FETs and ICs in a large variety of customer end products in Hall 9, Stand 113.

The EPC2050 offers power systems designers a 350 V, 80 mΩ maximum R_DS(on), 26 A peak current power transistor in an extremely small chip-scale package. These new devices are ideal for multi-level converters, EV charging, solar power inverters, lidar, and LED lighting.

EL SEGUNDO, Calif.— April 2022 — EPC announces the production release of the EPC2050, a 350 V GaN transistor with a maximum R_DS(on) of 80 mΩ and a 26 A pulsed output current. The EPC2050 measures just 1.95 mm x 1.95 mm. This tiny size enables power solutions that occupy ten times less area than comparable silicon solutions.

The latest ePower™ integrated circuits based on gallium nitride technology by Efficient Power Conversion are revolutionizing motor drive applications such as industrial drones, e-bikes, scooters, power tools.

Bodo’s Power Systems
April, 2022
Read article

Efficient Power Conversion (EPC) expands its family of radiation-hardened (rad-hard) gallium nitride (GaN) products for power conversion solutions in critical spaceborne and other high reliability environments with a device that has the lowest on-resistance of any rad hard transistor currently available on the market.

EL SEGUNDO, Calif.— March 2021 — EPC announces the introduction of the EPC7019 radiation-hardened eGaN FET. The EPC7019, a 40 V, 1.5 mΩ, 530 A_Pulsed, rad-hard eGaN FET in a small 13.9 mm² footprint. The EPC7019 has a total dose rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm²). These devices are offered in a chip-scale package, the same as the commercial eGaN FET and IC family.  Packaged versions will be available from EPC Space.

The EPC9167 GaN-based inverter reference design enhances motor system performance, range, precision, torque, all while lowering overall system cost. The extremely small size of this inverter allows integration into the motor housing resulting in the lowest EMI, highest density, and lowest weight.

Robotics Tomorrow
March, 2022
Read article

EPC’s GaN Experts will be available during APEC, exhibiting various demonstrations showcasing how GaN technology’s superior performance is transforming the delivery of power across many industries, including computing, communications, and emobility.

EL SEGUNDO, Calif. — March 2022 — The EPC team will be delivering multiple technical presentations, as well as a professional seminar on gallium nitride (GaN) technology and applications at the IEEE Applied Power Electronics Conference and Exposition (APEC 2022) in Houston from March 20^th through the 24^th (See detailed schedule below). In addition, the company will demonstrate its latest eGaN^® FETs and ICs in a large variety of customer end products in booth #1307.

The EPC9167 GaN-based inverter reference design enhances motor system performance, range, precision, torque, all while lowering overall system cost. The extremely small size of this inverter allows integration into the motor housing resulting in the lowest EMI, highest density, and lowest weight.

EL SEGUNDO, Calif.— February, 2022 — EPC announces the availability of the EPC9167, a 3-phase BLDC motor drive inverter using the EPC2065 eGaN^® FET. The EPC9167 operates from an input supply voltage between 14 V and 60 V (nominal 48 V) and has two configurations – a standard unit and a high current version:

The year 2021 was a transitional year in which the world decided to open its doors to GaN. In this interview with Power Electronics News during CES week, GaN industry experts confirmed that GaN is now proving its superiority over silicon.

Power Electronics News
January, 2022
Read article

In the field of motion control, there is a growing use of GaN devices, especially in low voltage applications. This paper provides guidelines for designers on the optimal use of GaN FETs in motor control applications, identifying the advantages and discussing the main issues.

Energies Journal
October, 2021
Download and read article

EPC announces the introduction of a 100 V, 65 A integrated circuit chipset designed for 48 V DC-DC conversion used in high-density computing applications and in 48 V BLDC motor drives for e-mobility, robotics, and drones.

The EPC23101 eGaN IC plus EPC2302 eGaN FET offers a new ePower Chipset capable of a maximum withstand voltage of 100 V, delivering up to 65 A load current, while capable of switching speeds greater than 1 MHz.

EE World Online
December, 2021
Read article

GaN devices and applications, such as lidar, DC-DC conversion, motor drive, and low-cost satellites using gallium nitride FETs and ICs, form the focus of this book, GaN Power Devices and Applications.

EL SEGUNDO, Calif. — October 2021 — Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, announces the publication of a valuable learning resource for professional engineers, systems designers, and electrical engineering students seeking the latest information on gallium nitride technology and applications.