What are the factors impacting gallium nitride’s adoption across a wide range of power management applications? In this article, we will explore the feedback that EPC has received from customers we have visited over the last 13 years that the company has been in volume production.

Power Electronics News
October, 2023
Read article

Gallium nitride (GaN) transistors and ICs have the best attributes to satisfy BLDC inverter needs. The superior switching capability of GaN helps to remove dead time and increase PWM frequency to obtain unmatched sinusoidal voltage and current waveforms for smoother, silent operation with higher system efficiency

Power Systems Design
May, 2023
Read article

Power-conversion technologies are experiencing the first tectonic shift since the move from bipolar to MOS. That shift, of course, is due to the viral adoption of wide-bandgap power devices. At this point, GaN is more than a specialty technology; it is a broad-scale replacement for silicon MOSFETs in applications ranging from 30 V up to 650 V — a multibillion-dollar market.

Power Electronics News
December, 2022
Read article

Easy Engineering interviewed EPC’s Director of Marketing, Renee Yawger, on the current state of GaN adoption and the future of GaN technology.

Easy Engineering
May, 2022
Read article

In this article, the most common reasons for some customers to be slower in their embracing what is clearly a displacement technology for their older silicon-based power MOSFETs will be discussed. Without going into the detailed statistics, a list of reasons, in order of frequency is derived. This list is based upon the understanding that some applications will place higher emphasis than others on certain characteristics of GaN. Our discussion is limited to devices rated at less than 400 V, as that is the application focus for Efficient Power Conversion (EPC) FET and IC products.

Power Systems Design
March, 2022
Read article

The year 2021 was a transitional year in which the world decided to open its doors to GaN. In this interview with Power Electronics News during CES week, GaN industry experts confirmed that GaN is now proving its superiority over silicon.

Power Electronics News
January, 2022
Read article

Gallium nitride (GaN) power devices have been in production for over 10 years and, beyond just performance and cost improvements, the most significant opportunity for GaN technology to impact the power conversion market comes from the intrinsic ability to integrate multiple devices on the same substrate. This capability will allow monolithic power systems to be designed on a single chip in a more straightforward, higher efficiency, and more cost-effective way.

Power Electronic News
March, 2021
Read article

Just like life’s reality, when the aged leaves the center stage for the younger ones, Silicon is taking the bow. The advent and adoption of Gallium Nitride (GaN) have succeeded in gradually easing out the old reliable Silicon. For over four decades, power management efficiency and cost have improved steadily as innovations in power MOSFET structures, technology, and circuit topologies have kept pace with the growing need for electrical power. In the new millennium, however, the rate of improvement has slowed dramatically as the silicon power MOSFET approaches its theoretical bounds. At the same time, the new material, GaN is steadily progressing on its journey toward a theoretical performance boundary that is 6,000 times better than the aging silicon MOSFET and 300 times better than the best GaN products on the market today.

EEWeb
July 16, 2020
Read article

For over four decades, power management efficiency and cost have improved steadily as innovations in power MOSFET structures, technology, and circuit topologies have kept pace with the growing need for electrical power. In the new millennium, however, the rate of improvement has slowed dramatically as the silicon power MOSFET approaches its theoretical bounds. At the same time, a new material, gallium nitride (GaN) is steadily progressing on its journey toward a theoretical performance boundary that is 6,000 times better than the aging silicon MOSFET and 300 times better than the best GaN products on the market today.

EETimes
June, 2020
Read article

Three years ago, the cost of making medium voltage eGaN FETs fell below the cost of equivalently rated power MOSFETs. At that time EPC decided to use the performance and cost advantages of eGaN FETs to aggressively pursue applications with input, or output, voltage around 48 V. Specifically, automotive and computer applications is where 48 V conversion is becoming the new architecture, the new standard for power systems.

Power Systems Design
March 31, 2020
Read article

In this webinar, Alex Lidow, CEO of Efficient Power Conversion Corporation, discussed how GaN technology significantly improves system efficiency, size, and cost, thus accelerating the adoption of magnetic resonance and AirFuel Resonant technology.

View the Webinar

This article discussed an oft forgotten or little-noticed part of the spacecraft enabling travel into outer space---power management in the space vehicle. Wide bandgap semiconductors like gallium nitride (GaN), silicon carbide (SiC), as well as diamond, are looking to be the most promising materials for future electronic components since the discovery of silicon. These technologies, depending upon their design, offer huge advantages in terms of power capability (DC and microwave), radiation insensitivity, high temperature and high frequency operation, optical properties and even low noise capability. Therefore, wide bandgap components are strategically important for the development of next generation space-borne systems. eGaN devices are quickly gaining momentum in the space industry and we will see many more applications for them by NASA and commercial contractors in future programs like Artemis and other programs in countries around the globe pursuing efforts into Space.

Power Systems Design
November, 2019
Read article

GaN and SiC are becoming much more attractive as prices drop. Several vendors are rolling out the next wave of power semiconductors based on gallium nitride (GaN) and silicon carbide (SiC), setting the stage for a showdown against traditional silicon-based devices in the market.

Semiconductor Engineering
October, 2019
Read article

From the heart of Silicon Valley comes a new buzzword. Gallium nitride is the future of power technology. Tech blogs are touting gallium nitride as the silicon of the future, and you are savvy enough to get in on the ground floor. Knowing how important gallium nitride is makes you a smarter, better consumer. You are at the forefront of your peer group because you know of an up and coming technology, and this one goes by the name of gallium nitride.

HACKADAY
Read article

This year’s PCIM Europe was attended by a record number of visitors, over 12,000. Over half (54%) were from outside Germany. They came to see over 500 exhibitors and while the subject matter was diverse and wide-ranging, there were some themes that emerged. GaN and SiC jostled for attention at this year’s PCIM Europe. Showing the potential that GaN has already realised, Efficient Power Conversion (EPC) had a stand that was well-stocked with examples of the eGaN FET technology that the company introduced in 2009.

Electronic Specifier
Read article

In the final installment of this series, how GaN has met the requirements to displace silicon is explored. As the adoption rate of GaN explodes, it is important to remember that, while GaN has made many advancements in just a few short years, it is still far from its theoretical performance limitations and thus there are profound improvements that can continue to be achieved. In time, the performance and cost advantages of GaN-on-silicon will result in a majority of applications currently using silicon-based devices converting to the smaller, faster, cheaper, and more reliable GaN technology.

Power Systems Design
February, 2019
Read article

As an example of the contribution to performance GaN devices can make to one of these mainstream applications, a traditional silicon application, the 12 V – 1 V point-of-load (POL) DC/DC converter will be examined. An eGaN IC based 12 V to 1 V, 12 A load converter yielding a peak efficiency of 78% at 5 MHz with a power density of at least 1000 W/in³, all with a cost below $0.20 per watt will be shown

Power Systems Design
January, 2019
Read article

In this series, how the superior switching speed of gallium nitride (GaN)-on-silicon low voltage power devices have enabled many new applications is being discussed. These applications are transforming industries such as light detection and ranging (LiDAR) for autonomous vehicles, envelope tracking for 5G communications and large surface area wireless power for the home and office. In this article, how GaN power devices are transforming medicine by bringing precision control to surgical robots is examined.

Power Systems Design
Read article

In the first article in this series, how gallium nitride (GaN)-on-silicon low voltage power devices have enabled many new applications, such as light detection and ranging (LiDAR), envelope tracking, and wireless power was discussed. In this article, more detail on one of these leading applications, LiDAR, will be explored. How GaN is being used to make LiDAR systems that see farther, with higher resolution, and at lower cost will be shown.

Power Systems Design
Read article

Last week, Anker debuted a tiny new power brick, crediting its small size with the component it uses instead of silicon: gallium nitride (GaN). It’s the latest example of the growing popularity of this transparent, glass-like material that could one day unseat silicon and cut energy use worldwide.

The Verge
Read article