Sign up today to get the latest news and updates from EPC on new product announcements, applications work, and much more. Sign up for EPC email updates or text "EPC" to 22828.

EPC Launches a New Generation of eGaN Technology that Doubles Performance

Categories: Press Releases
EPC Launches a New Generation of eGaN Technology that Doubles Performance

Efficient Power Conversion (EPC) introduces the 80 V, 4 mOhm EPC2619 GaN FET in tiny 1.5 mm x 2.5 mm footprint, offering higher performance and smaller solution size than traditional MOSFETs for high power density applications, including DC-DC conversion, motor drives, and synchronous rectification for 12 V – 20 V.

EL SEGUNDO, Calif.— November 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (GaN) power FETs and ICs, launches the 80 V, 4 mOhm EPC2619. This is the lead product for a new generation of eGaN devices that have double the power density compared to EPC’s prior-generation products.

The EPC2619 has an RDS(on) of just 4 mOhms in a tiny, 1.5 mm x 2.5 mm, footprint. The maximum RDS(on) x Area of the EPC2619 is 15 mΩ*mm2 – five times smaller than 80 V silicon MOSFETs.

This product is designed for a range of motor drive applications. For example: 28 V – 48 V conversion for eBikes, eScooters and power tools; high density DC-DC converters; solar optimizers; and synchronous rectification converting 12 V – 20 V for chargers, adaptors, and TV power supplies.

The typical RDS(on) x QGD, which is indicative of power losses in hard-switching applications, is 10 times better than 80 V silicon MOSFETs. This enables switching frequencies that are 10 times higher than silicon MOSFETs and without an efficiency penalty, thus producing the highest power density.  This makes the EPC2619 ideal for high frequency hard-switching 24 V – 48 V applications, such as used in buck, buck-boost, and boost converters.

The typical RDS(on) x QOSS, which is indicative of power losses in soft-switching applications, is 87 mOhm*nC, two times better than 80 V silicon MOSFETs. This makes the EPC2619 ideal for soft-switching applications, such as the primary rectification full bridge for LLC-based DCX DC-DC converters.

“This is just the first product of a new generation of discrete transistors and integrated circuits for EPC. With the launch of the EPC2619, EPC continues to keep GaN power devices on a path reminiscent of Moore’s Law,” noted Alex Lidow, EPC CEO and co-founder.

Development Board

The EPC90153 development board is a half bridge featuring the EPC2619 GaN FET. It is designed for 80 V maximum device voltage and 20 A maximum output current. The purpose of this board is to simplify the evaluation process of power systems designers to speed their product’s time to market. This 2” x 2” (50.8 mm x 50.8 mm) board is designed for optimal switching performance and contains all critical components for easy evaluation.

Price and Availability

The EPC2619 is priced at $1.90 each in 2.5 Ku volumes.

The EPC90153 development board is price at $200.00 each.

Designers interested in replacing their silicon MOSFETs with a GaN solution can use the EPC GaN Power Bench’s cross-reference tool to find a suggested replacement based on their unique operating conditions. The cross-reference tool can be found at:

About EPC

EPC is the leader in enhancement mode gallium nitride (eGaN®) based power management. eGaN FETs and integrated circuits provide performance many times greater than the best silicon power MOSFETs in applications such as DC-DC converters, remote sensing technology (lidar), motor drives for eMobility, robotics, and drones, and low-cost satellites.

Follow EPC on social media: LinkedIn, YouTube, Facebook, Twitter, Instagram, YouKu

eGaN is a registered trademark of Efficient Power Conversion Corporation, Inc.

Press contact: Efficient Power Conversion:  Renee Yawger tel: +1.908.619.9678 email: [email protected]