Monolithic GaN integration has matured to the point that complex circuits such as a half bridge gate driver with various features can now be realized. This article will cover DC-to-DC and BLDC motor drive application examples that benefit from monolithic half-bridge integration.

Power Electronics News
May, 2023
Read article

Efficient Power Conversion (EPC) expands its family of footprint compatible ePower™ Stage ICs to boost power density and simplify design for different power requirements in DC-DC applications, motor drives, and class-d audio amplifiers.

EL SEGUNDO, Calif.— March 2023 — EPC announces the introduction of two new 100 V power stage ICs rated at 15 A (EPC23104) and 25 A (EPC23103). The two devices join the 100 V 35 A power stage IC EPC23102 offered by EPC.

GaN technology is developing rapidly with frequent releases of new generations of discrete devices that become the platform for new generations of more efficient, smaller, and lower cost integrated circuits. GaN integrated circuits make products smaller, faster, more efficient, and easier to design.

Power Systems Design
March, 2021 (page 36)
Read article

With the new 100 V EPC2104 eGaN^®half bridge, a system efficiency of a complete buck converter using the EPC2104 is greater than 97% at 22 A switching at 300 kHz, and approaching 97% at 22 A when switching at 500 kHz, achieved when converting from 48 V to 12 V.

EL SEGUNDO, Calif. — April 2015 — EPC announces the EPC2104, 100 V enhancement-mode monolithic GaN transistor half bridge. By integrating two eGaN® power FETs into a single device, interconnect inductances and the interstitial space needed on the PCB are eliminated, resulting in a 50% reduction in board area occupied by the transistors. This increases both efficiency (especially at higher frequencies) and power density, while reducing assembly costs to the end user’s power conversion system.

Efficient Power Conversion introduces the EPC2102, 60 V and EPC2103, 80 V half bridges, expanding its award winning family of gallium nitride power transistor products.

EL SEGUNDO, Calif. — January 2014 — EPC announces the EPC2102, 60 V and the , 80 V enhancement-mode monolithic GaN transistor half bridges.

EPC2100 GaN power transistor single-chip half-bridge products honored with award for innovative advancement in discrete semiconductors.

EL SEGUNDO, Calif — January 2015 — Efficient Power Conversion Corporation’s (EPC) enhancement-mode gallium nitride on silicon (eGaN^®) monolithic half-bridge power transistor products have been honored with an Electronic Products’ Product of the Year award.

The EPC2101 GaN power monolithic half bridge offers power systems designers a solution that increases efficiency and power density. For a complete buck converter, system efficiency approaches 87% at 14 A, and over 82% at 30 A when switching at 500 kHz and converting from 28 V to 1 V while reducing the board area occupied by transistors by 50% when compared to a discrete solution.

EL SEGUNDO, Calif. — November 2014 — EPC announces the EPC2101, 60 V enhancement-mode monolithic GaN transistor half bridge. By integrating two eGaN^® power FETs into a single device, interconnect inductances and the interstitial space needed on the PCB are eliminated, resulting in a 50% reduction in board area occupied by the transistors. This increases both efficiency (especially at higher frequencies) and power density, while reducing assembly costs to the end user’s power conversion system. The EPC2101 is ideal for high frequency DC-DC conversion.

EPC2105 GaN half bridge offers power systems designers a solution that increases efficiency and power density for complete buck converter systems approaching 98% at 10 A when switching at 300 kHz and converting from 48 V to 12 V, and 84% at 14 A when switching at 300 kHz and converting from 48 V to 1.0 V.

EL SEGUNDO, Calif. — November 2014 — EPC announces the EPC2105, 80 V enhancement-mode monolithic GaN transistor half bridge. By integrating two eGaN^® power FETs into a single device, interconnect inductances and the interstitial space needed on the PCB are eliminated. This increases both efficiency (especially at higher frequencies) and power density, while reducing assembly costs to the end user’s power conversion system. The EPC2105 is ideal for high frequency DC-DC conversion and enables efficient single stage conversion from 48 V directly to 1 V system loads.

EPC2100 GaN power transistor offers power systems designers a solution that increases efficiency and power density for complete buck converter systems approaching 93% at 10 A, and over 90.5% at 25 A when switching at 500 kHz and converting from 12 V to 1.2 V.

EL SEGUNDO, Calif. — September 2014 — EPC announces the EPC2100, the first commercially available enhancement-mode monolithic GaN transistor half bridge. By integrating two eGaN power FETs into a single device, interconnect inductances and the interstitial space needed on the PCB are eliminated. This increases both efficiency (especially at higher frequencies) and power density, while reducing assembly costs to the end user’s power conversion system.