EPC’s GaN Experts will be available during APEC, exhibiting various demonstrations showcasing how GaN technology’s superior performance is transforming the delivery of power across many industries, including computing, communications, and emobility.

EL SEGUNDO, Calif. — March 2022 — The EPC team will be delivering multiple technical presentations, as well as a professional seminar on gallium nitride (GaN) technology and applications at the IEEE Applied Power Electronics Conference and Exposition (APEC 2022) in Houston from March 20^th through the 24^th (See detailed schedule below). In addition, the company will demonstrate its latest eGaN^® FETs and ICs in a large variety of customer end products in booth #1307.

The EPC2152 ePower™ Stage enables higher performance and smaller solution size for high performance, low-cost BLDC motors as demonstrated in the EPC9146 demonstration board.

EL SEGUNDO, Calif.— May, 2021 — EPC announces the availability of the EPC9146, a 400 W motor drive demonstration. The EPC9146 power board contains three independently controlled half bridge circuits, featuring the EPC2152 monolithic ePower™ Stage with integrated gate driver, 80 V maximum device voltage, 15 A (10 A_RMS) maximum output current. The inverter board measures just 81 mm x 75 mm and achieve an efficiency of greater than 98.4% at 400 W output power.

Efficient Power Conversion, is at the forefront of GaN-based device development. In this video, EPC CEO Alex Lidow talks with Alix Paultre about the various design-ins at the show that underscore the advantages GaN-based devices can provide.

Embedded Computer Design
View video

EL SEGUNDO, Calif. — June 22, 2018 -- Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN^®) power FETs and ICs, will meet with design engineers in power management in Shanghai, China, for knowledge exchanges on solutions using a synchronous FET Class E rectifier for over 30 W highly-resonant wireless power receivers, and a kilowatt laser driver with 120 A, sub-10 nanosecond pulses in < 3 cm² using eGaN FET.

Meet EPC experts on power management at PCIM Asia Exhibition and Conference on June 26th, 2018 (Tuesday) at 10 a.m. – 10.50 a.m. at Exhibition Hall No. 2, 1/F of Shanghai World Expo Exhibition and Convention Center, 1099 Guozhan Road, Shanghai, China.

Efficient Power Conversion (EPC) will exhibit live demonstrations at PCIM Europe 2018 showing how GaN technology’s superior performance is transforming power delivery for entire industries including computing, communications, and automotive.

EL SEGUNDO, Calif. — May 2018 — The EPC team will be delivering five technical presentations on gallium nitride (GaN) technology and applications at PCIM Europe 2018 in Nuremberg, Germany from June 5^th through the 7^th. In addition, in Hall 7, Stand 539, the company will exhibit its latest eGaN^® FETs and ICs in customers’ end products that are enabled by eGaN technology.

EPC continues its 2018 GaN China Roadshow with participation in the upcoming WiPDA 2018 conference in Xian May 17^th through 18^th

EL SEGUNDO, Calif.— May 2018 — Efficient Power Conversion Corporation (EPC) started a GaN China Roadshow 2018 beginning in Shenzhen in March with technical presentations at the AirFuel Developers Forum. The second event in the roadshow was participation in SEMI China’s Power and Compound Semiconductor International Forum held in Shanghai, where Alex Lidow, CEO gave a keynote speech. Soon, from May 17 to 19, EPC will be meeting with engineers to share knowledge and demonstrations of eGaN^® devices, at WiPDA Asia IEEE workshop to be held at the Cullinan Huicheng Hotel in Xi’an.  Beyond WiPDA, the next stop for the EPC roadshow will be PCIM Asia, to be held in Shanghai, June 26^th through 28^th.  At this conference, EPC experts will be giving technical presentations on the use of GaN devices in wireless power transfer and LiDAR for autonomous cars.

EPC CEO & Co-Founder, Alex Lidow gives Lee Teschler from EE World Online a tour of the EPC booth at APEC 2018 where EPC demonstrations included a high-power density 48 V – 12 V non-isolated converter capable of delivering over 700 W. In addition, a range of 3-D real-time LiDAR imaging sensors used in autonomous vehicles were displayed. Also, a single desktop implementing a high power resonant wireless charging solution capable of generating 300 W to wirelessly power a wide range of devices including cell phones, notebook computers, monitors, wireless speakers, smart watches, and table lamps.

View videos below.

In this video Alex Lidow, Founder and CEO of EPC, talks to Alix Paultre, Editor-in-Chief of Power Electronics News, about the various demonstrations of GaN-based solutions at the EPC booth at APEC 2018 in San Antonio, Texas. The high-frequency operation and other advanced performance advantages over Silicon enables GaN to empower applications from LIDAR to wireless power transmission. The booth exhibits include examples of these, from a real-time LIDAR demonstration to a running "wireless desk".

Power Electronics News
View video

LIDAR is made up of a laser (or arrays) capable of transmitting pulsed light over the required range of interest, and a high-speed, low-noise receiver for reflected signal analysis. A portion of this light is reflected or scattered back to the receiver according to the reflectivity of the target.

EDN Network
Read article

EPC will exhibit live demonstrations showing how GaN technology’s superior performance is transforming power delivery for entire industries including wireless charging, DC/DC, LiDAR and automotive.

EL SEGUNDO, Calif. — March 8, 2018 — The EPC executive and technical team will be engaged in three industry events in Shenzhen and Shanghai, China on March 14 – 16 in demonstrating and sharing with engineers on how to maximize GaN FET and IC performance in their innovative designs, to win their customers.

EPC will exhibit live demonstrations showing how GaN technology’s superior performance is transforming power delivery for entire industries including computing, communications, and automotive.

EL SEGUNDO, Calif. — February 2018 — The EPC team will be delivering seven technical presentations on gallium nitride (GaN) technology and applications at APEC 2018 in San Antonio, Texas from March 4^th through the 8^th. In addition, the company will demonstrate its latest eGaN FETs and ICs in customers’ end products that are enabled by eGaN technology.

Within the AirFuel^TM Alliance booth at CES 2018, EPC will show how gallium nitride (GaN) semiconductors are at the core of large surface area wireless power. In the EPC hospitality suite, wirelessly powered systems for the home and GaN based, industry-leading LiDAR systems used in autonomous vehicles will be on display.

EL SEGUNDO, Calif. — December 2017 — Efficient Power Conversion (EPC) will be demonstrating the power of eGaN^® technology to enhance two game-changing consumer applications – wireless power and LiDAR for self-driving cars – at the 2018 Consumer Electronics Show (CES) in Las Vegas, January 9^th through the 12^th.

EPC will exhibit an innovative wireless power tabletop at 2017 Wireless Power Summit highlighting the capability of GaN-based semiconductor magnetic resonance technology to provide wireless power over a large surface area to many receiving devices such as cell phones, laptop computers, and table lamps – at the same time!

EL SEGUNDO, Calif. — September 2017 — The future of wireless power and its eventual ubiquitous adoption is dependent upon the ability of end users to place any electrical item on a surface and have it powered without having to “plug in.” It is this ability that EPC will demonstrate at the Wireless Power Summit 2017 being held in Denver, Colorado October 5th and 6th at the Embassy Suites Hotel Downtown.

EL SEGUNDO, Calif. — June 21st, 2017 -- Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN^®) power FETs and ICs, enables a lower-cost, single transmit amplifier solution that can wirelessly charge devices, regardless of the standard used in the receiving device.

Meet EPC experts on power management at PCIM Asia Exhibition and Conference on June 28th, 2017 at 11 a.m. at Meeting Room 2, B2 of Shanghai World Expo Exhibition and Convention Center in China. Dr. Michael de Rooij, Vice President of Application Engineering, EPC, will share with engineers about a choice among topologies to achieve customer-oriented designs for high power, highly resonant wireless charging applications.

EPC will exhibit more than 25 demonstrations showing how GaN technology’s superior performance is changing the way we live and company experts will deliver seven technical presentations on GaN FET and IC technology at APEC^® 2017, the premier global event in applied power electronics.

EL SEGUNDO, Calif. — March 2017 — The EPC team will be delivering seven technical presentations on gallium nitride (GaN) technology and applications at APEC 2017 in Tampa, Florida from March 26th through the 30th. In addition, the company will feature its latest eGaN^® FETs and ICs, as well as their customers’ end products that are enabled by eGaN technology.

In a dedicated hospitality suite at CES, the premier global event in consumer electronics, EPC will show how GaN is a core technology behind autonomous vehicles, the house of the future without power cords, the connected car, and non-invasive colonoscopies with an x-ray system within a pill.

EL SEGUNDO, Calif. — December 2016 — Efficient Power Conversion (EPC) will be hosting a hospitality suite in the Mandalay Bay hotel at the Consumer Electronics Show (CES) in Las Vegas, January 5^th through the 8^th.

Produced by industry experts, Efficient Power Conversion has posted six videos showing active end-use applications such as wireless power transfer, single-stage 48 V – 1 V DC-DC conversion, and envelope tracking for 4G/LTE base stations using gallium nitride transistors and integrated circuits.

EL SEGUNDO, Calif. – April 2016 - Efficient Power Conversion Corporation (www.epc-co.com) has created and posted to its website six short videos presenting end-customer applications using eGaN® FETs and ICs. The videos show how GaN technology is changing the way we live and challenge power systems design engineers to incorporate the high performance of gallium nitride FETs and ICs into their next generation power system designs.

In this short video, EPC's Alex Lidow explains why GaN FETs may make it possible to wirelessly charge a variety of vehicles, including flying drones. Wireless charging circuits employing GaN FETs work at 13.56 MHz, a switching frequency difficult to reach with ordinary silicon FETs. The GaN transistors used are also five to ten times smaller than silicon devices able to handle the same power levels.

Design World
April 11, 2016
View video

In this short video, EPC's Alex Lidow explains why GaN FETs can comprise circuits able to deliver Lidar resolutions down to a couple inches. Conventional silicon FETs performing the same tasks would be able to resolve images only down to a few feet. The secret is in the super-fast rise and fall times made possible by the GaN FETs.

Design World
April 11, 2016
View video

You might have seen some behind-the-scenes tweets from the life of the ECN editor (and News Director) and while a picture is worth a thousand words, sometimes an engineer's perspective on a conference is worth a little more.

With that in mind, I reached out to some APEC engineers and attendees to get the lowdown on this year's Applied Power Electronics Conference in Long Beach, CA. We talked about how the show compared to last year, the biggest trends, and how APEC went for their companies.

ECNMag.com
Kasey Panetta
Read article