Sign up today to get the latest news and updates from EPC on new product announcements, applications work, and much more. Sign up for EPC email updates.
Modern solar panels are demanding increasingly higher power density and longer operating lifetimes. Solar applications including power optimizers and panels with built-in microinverters are becoming the prevailing trend for an increasing number of solar customers, where low voltage GaN power devices (VDS < 200 V) are extensively used.
Bodo’s Power Systems
May, 2023
Read article
Read more
Efficient Power Conversion (EPC) publishes Phase-15 Reliability Report adding to the extensive knowledge base on GaN reliability and mission robustness.
EL SEGUNDO, Calif.— March 2023 — EPC announces the publication of its Phase-15 Reliability Report, documenting continued work using test-to-fail methodology and adding specific reliability metrics and predictions for real world applications including solar optimizers, lidar sensors, and DC-DC converters.
Read more
Efficient Power Conversion (EPC) introduces the 200 V, 10 mΩ EPC2307 that completes a family of six GaN transistors rated at 100V, 150V, and 200V, offering higher performance, smaller solution size, and ease of design for DC-DC conversion, AC/DC SMPS and chargers, solar optimizers and microinverters, and motor drives.
EL SEGUNDO, Calif.— January 2023 — EPC, the world’s leader in enhancement-mode gallium nitride FETs and ICs, introduces the 200 V, 10 mΩ EPC2307 in a thermally enhanced QFN in a tiny 3 mm x 5 mm footprint.
Read more
Efficient Power Conversion (EPC) introduces the 150 V, 3 mΩ EPC2305 and the 200 V, 5 mΩ EPC2304 GaN FETs offering higher performance and smaller solution size and cost for DC-DC conversion, AC/DC SMPS and chargers, solar optimizers and microinverters, and motor drives.
EL SEGUNDO, Calif.— December 2022 — EPC, the world’s leader in enhancement-mode gallium nitride FETs and ICs, introduces the 150 V, 3 mΩ EPC2305 and the 200 V, 5 mΩ EPC2304 GaN FETs in a thermally enhanced QFN package with exposed top and tiny 3 mm x 5 mm footprint.
Read more
Efficient Power Conversion (EPC) introduces the 80 V, 4 mOhm EPC2619 GaN FET in tiny 1.5 mm x 2.5 mm footprint, offering higher performance and smaller solution size than traditional MOSFETs for high power density applications, including DC-DC conversion, motor drives, and synchronous rectification for 12 V – 20 V.
EL SEGUNDO, Calif.— November 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (GaN) power FETs and ICs, launches the 80 V, 4 mOhm EPC2619. This is the lead product for a new generation of eGaN devices that have double the power density compared to EPC’s prior-generation products.
Read more
GaN FETs help Solarnative achieve industry-leading power density for solar microinverters, enabling module frame integration to solve the challenges of solar power installation.
EL SEGUNDO, Calif.— November 2022 Solarnative uses GaN devices in its new microinverter to achieve industry-best power density. The Power Stick is the smallest inverter in the world, with dimensions of 23.9 by 23,2 by 404 millimeters. With an AC output power of 350 W, the volume of 0.19 liters corresponds to a power density of 1.6 kW per liter. By comparison, the IQ 7A microinverter from a market leading supplier delivers 349 watts with a volume of 1.12 liters, corresponding to 0.31 kW per liter – not even one-fifth of the Solarnative device. Despite the extreme size reduction, the European efficiencies are quite comparable, at 96.0 percent for the Power Stick and 96.5 percent for the IQ 7A.
Read more
Efficient Power Conversion (EPC) introduces the 150 V, 6 mΩ EPC2308 GaN FET, offering higher performance and smaller solution size for high power density applications including DC-DC conversion, AC/DC SMPS and chargers, solar optimizers and microinverters, and motor drives.
EL SEGUNDO, Calif.— October 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (eGaN®) power FETs and ICs, expands the selection of off-the-shelf GaN FETs in thermally enhanced QFN packages with the introduction of the 150 V EPC2308 designed for motor drive in power tools and robots, high density DC-DC from/to 80 V-100 V for industrial applications, synchronous rectification to 28 V – 54 V for chargers, adaptors and power supplies, smartphones USB fast chargers, and in solar optimizers and microinverters.
Read more