EL SEGUNDO, Calif – November 2023 – Efficient Energy Technology GmbH (EET), the Austrian-based pioneer in designing and producing innovative balcony power plants, has selected Efficient Power Conversion Corporation’s (EPC) EPC2204 enhancement-mode gallium nitride (eGaN^®) power transistor for its latest SolMate^® green solar balcony product. The EPC2204 strikes an optimal compromise between low R_DS(on) and low C_OSS, critical for demanding hard switching application, while featuring a drain-source breakdown voltage of 100 V in a compact package. This compact design significantly reduces PCB size, keeps current loops small, and minimizes electromagnetic interference (EMI) emissions.

Gallium nitride–based high-electron–mobility transistors (HEMTs) have been widely adopted in both consumer and industrial power conversion due to their many material and device advantages over legacy silicon-based converters. The improvements in power-conversion efficiency at much higher switching frequencies that are enabled by GaN can translate to lower system costs and improved power density. Heat dissipation analysis and thermal modeling become critically important as power densities increase. In this article, we will review a thermal calculator tool released by Efficient Power Conversion (EPC). EPC manufactures enhancement-mode GaN HEMTs and integrated power-conversion circuits like half-bridges that form the building blocks of many converters.

Power Electronics News
November 2023
Read article

Space exploration has always demanded cutting-edge technology, reliability, and resilience. The latest breakthrough in power electronics, gallium nitride (GaN) technology, has emerged as a game-changer for space-based systems offering superior radiation tolerance and unmatched electrical performance compared to traditional silicon MOSFETs. In this article, we delve into the reasons why GaN power devices are the ultimate choice for power conversion applications in space and how their resistance to radiation makes them an extremely robust solution for space missions.

Components in Electronics
October 2023
Read article

LLC resonant converters have emerged as the preferred topology for an intermediate 48 V to 12 V conversion due to their high efficiency, high power density and good dynamic response. The outstanding performance resulting from the combination of this topology with GaN transistors has been demonstrated in the past. This article presents how the newest generation of GaN devices, such as those from EPC, continues to push the envelope even further.

Bodo’s Power Systems
November, 2023
Read article

The EPC9194 GaN-based inverter reference design significantly enhances motor drive system efficiency, range, and torque, while more than doubling power per weight. The inverter’s extremely compact size allows seamless integration into the motor housing resulting in the lowest electromagnetic interference (EMI,) highest density, and lowest weight.

EL SEGUNDO, Calif.— October, 2023 — EPC announces the availability of the EPC9194, a

The space industry is undergoing a transformative shift to “New Space,” driven by the increasing demand for ubiquitous connectivity and the emergence of innovative business models. One of the key elements of this transformation is the adoption of gallium nitride (GaN) technology in space applications. GaN holds immense potential due to its impressive radiation hardness, high system efficiency and lightweight characteristics.

In a discussion with EE Times Europe, Taha Ayari and Aymen Ghorbel, technology and market analysts at Yole Intelligence, part of Yole Group, explained how New Space—the low Earth orbit (LEO) mission segment, with a typical satellite lifespan of three to five years and lower reliability requirements—has become a focal point for GaN adoption. As a result, power GaN devices are being adopted for various satellite systems, including DC/DC converters, point-of-load systems, motor drives and ion thrusters.

EE Times Europe
October 2023
Read article

What are the factors impacting gallium nitride’s adoption across a wide range of power management applications? In this article, we will explore the feedback that EPC has received from customers we have visited over the last 13 years that the company has been in volume production.

Power Electronics News
October, 2023
Read article

Battery-powered industrial vehicles such as forklifts, manual handlers, or warehouse automatic vehicles require high-current inverters to drive the electric motors. Gallium nitride technology helps to increase the power capability and simplify the inverter design in these applications.

Bodo’s Power Systems
October, 2023
Read article

Efficient Power Conversion (EPC) is optimistic about GaN despite geopolitical challenges and the changing landscape in the compound semiconductor sector.

DIGITIMES
September, 2023
Read article

Gallium Nitride (GaN) semiconductor company Efficient Power Conversion (EPC) is taking a fresh stab at the power component landscape, challenging the longstanding silicon hegemony.

DIGITIMES
September, 2023
Read article

Bringing GaN to the final frontier, EPC Space introduced two new radiation-hardened GaN transistors for high-current switching in space-based applications. As the number of commercial satellites continues to increase, designers require more options for space-ready power electronics with improved current handling.

All About Circuits
September, 2023
Read article

As more processing power and more complex loads are placed on-orbit or into deep space missions, it is sometime necessary to parallel two or more power switches. However, conventional power device packages, such as the FSMD-A/B/C/D and their I/O pad provisioning make it difficult to accomplish paralleling these devices in a performance-conscious manner. When paralleled, the gate and source-sense pads on these packages either serve to block the most efficient/shortest interconnect from package-to-package for the drain and source connections or for the gate and source-sense pads. So in parallel configurations, there is always a compromise between optimized drain-source load-circuit performance and gate-source-sense drive-loop performance. This article introduces the FSMD-G discrete HEMT package and explains how the reconfiguration of its I/O pads overcomes these limitations when paralleling GaN HEMTs.

How2Power
September, 2023
Read article Read more

The EPC9159 is a 1 kW, 48 V/ 12 V, LLC converter in a tiny 17.5 mm x 22.8 mm footprint for state-of-the-art power density of 5130 W/in³. 

EL SEGUNDO, Calif.— September 2023 — EPC announces the availability of the EPC9159, a 48 V / 12 V, LLC converter designed for high-density 48 V server power and DC-DC converters. This reference design can deliver 1 kW of power in a tiny 17.5 mm x 22.8 mm footprint for a power density of 5130 W/cm³. This is achieved by employing gallium nitride (GaN) power switches operating at high switching frequencies in both the primary and secondary circuits.

EPC Space has introduced radiation-hardened gallium nitride devices for space-borne power converters and other rugged environments.

Electronics Weekly
August, 2023
Read article Read more

GaN devices offer a plethora of benefits that align well with the demands of the space industry, addressing challenges related to reliability, radiation survivability, and space heritage.

Power Electronics News
August, 2023
Read article Read more

Microinverters and power optimizers are widely utilized in modern solar panels to maximize energy efficiency and conversion. Such topologies and implementations usually require a minimum of 25 years of lifetime, which is becoming a critical challenge for market adoption. Low-voltage gallium nitride (GaN) power devices (VDS rating < 200 V) are a promising solution and are being used extensively by an increasing number of solar manufacturers.

In this article, a test-to-fail approach is adopted and applied to investigate the intrinsic underlying wear-out mechanisms of GaN transistors. The study enables the development of physics-based lifetime models that can accurately project the lifetimes under the unique demands of various mission profiles in solar applications.

How2Power
August, 2023
Read article

As the revolution of renewable energy as well as transportation electrification progresses, the need for residential energy storage systems is increasing. A high efficiency DC-to-DC converter is usually required to exchange energy generated from renewable sources, such as solar panels, with a battery. The fast-switching speed and low R_DS(on) of gallium nitride (GaN) FETs can help save energy by reducing power consumption inside the DC-to-DC converter. This article shows how to design a high efficiency 100 – 250 V to 40 - 60 V DC-to-DC converter.

Power Electronics Europe
May, 2023
Read article

Automotive electronics have gone through several eras of evolution in the past 30 years. From the pure internal combustion engines (ICE) that had mostly mechanical, or engine-driven systems, to the mild hybrid (MHEV) with the addition of electrical motivation, to the fully battery-electric car (BEV). In each of these three eras, the architecture, and even the basic semiconductor components for converting and distributing electrical power changed. This article discusses this evolution and makes some speculations about likely further evolutionary directions.

Power Systems Design
August, 2023
Read article

In this article, Renesas Electronics explains how using a discreet GaN based power supply in the ISLVERSALDEMO2Z reference design for the core offers several advantages for power management in space avionics systems.

Power Electronics News
July, 2023
Read article

Lower-voltage GaN FETs are reducing size, minimizing cooling requirements and improving efficiency.

Lower-voltage GaN FETs (i.e., 100 V) are reducing size, minimizing cooling requirements and improving efficiency for many traditional Si-based power MOSFET applications. In this article, the challenges to repeatably and reliable characterization of the dynamic performance of these devices is discussed. Careful and thoughtful mechanical and electrical design of a customized GaN fixture and test board can overcome many of these challenges, enabling the confident use of these new WBG devices in your power-converter designs.

Power Electronics News
July, 2023
Read article