Sign up today to get the latest news and updates from EPC on new product announcements, applications work, and much more. Sign up for EPC email updates.
In this article EPC explains the improved performance in their Gen 6 GaN FETs and how the resulting devices can achieve the same RDS(on) as previous generation devices in die that are half the size.
How2Power
November, 2022
Read article
Read more
Efficient Power Conversion (EPC) introduces the 80 V, 4 mOhm EPC2619 GaN FET in tiny 1.5 mm x 2.5 mm footprint, offering higher performance and smaller solution size than traditional MOSFETs for high power density applications, including DC-DC conversion, motor drives, and synchronous rectification for 12 V – 20 V.
EL SEGUNDO, Calif.— November 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (GaN) power FETs and ICs, launches the 80 V, 4 mOhm EPC2619. This is the lead product for a new generation of eGaN devices that have double the power density compared to EPC’s prior-generation products.
Read more
EPC’s mission is to make GaN power devices that are higher performance and lower cost compared to silicon. GaN devices increase power density, improve efficiency and enable new applications and with the rising cost of energy globally, it is no surprise that the adoption rate of our GaN devices is accelerating dramatically.
Bodo’s Power Systems
November, 2022
Read article
Read more
As energy efficiency standards increase, high-voltage Silicon Carbide and low-voltage GaN are replacing traditional silicon, enabling cooler, lighter, and more powerful electronics. Join Guy Moxey and Alex Lidow, EPC CEO and Co-founder, and explore how Wolfspeed and EPC technologies complement one another in the race towards a more sustainable future.
Wolfspeed
Listen to podcast
Read more
GaN FETs help Solarnative achieve industry-leading power density for solar microinverters, enabling module frame integration to solve the challenges of solar power installation.
EL SEGUNDO, Calif.— November 2022 Solarnative uses GaN devices in its new microinverter to achieve industry-best power density. The Power Stick is the smallest inverter in the world, with dimensions of 23.9 by 23,2 by 404 millimeters. With an AC output power of 350 W, the volume of 0.19 liters corresponds to a power density of 1.6 kW per liter. By comparison, the IQ 7A microinverter from a market leading supplier delivers 349 watts with a volume of 1.12 liters, corresponding to 0.31 kW per liter – not even one-fifth of the Solarnative device. Despite the extreme size reduction, the European efficiencies are quite comparable, at 96.0 percent for the Power Stick and 96.5 percent for the IQ 7A.
Read more
With increasing legislation aimed at higher fuel efficiency standards, vehicle manufacturers are searching for cost-effective solutions to meet these demands while still providing the power required for ever-increasing electronically driven functions. This article details a bi-directional high power converter for mild-hybrid cars and battery backup units using GaN FETs to achieve efficiency exceeding 96% when converting from 48 V to 14.3 V at 500 kHz switching frequency.
Power Electronics Europe
Read article
Read more
From Nov. 15 to 18, electronica 2022 will bring the international electronics industry together at the Munich exhibition grounds. Wide Bandgap Semiconductors, Renewable Energies, Smart Grid, and Energy Storage will be the major topics covered by the Power Electronics Forum at electronica 2022. In this podcast, onsemi president and CEO Hassane El-Khoury, Silanna Semiconductor North America CEO Mark Drucker, and of Efficient Power Conversion (EPC) CEO Alex Lidow will introduce the Power Electronics Forum. Interview with Alex Lidow starts at 31:55
EETimes
Listen to podcast
Read more
GaN devices have gone from initial R&D to mainstream designs over the last 15 years. Unfortunately, there are many misunderstandings left-over from those early-stage bipolar drive circuit developments or dead-end technology branches. One of the most pernicious is the topic of bipolar drive. In actuality, unipolar drives are the best way to drive eGaN® FETs.
Power Electronics Tips
October, 2022
Read article
Read more
Efficient Power Conversion (EPC) introduces the 150 V, 6 mΩ EPC2308 GaN FET, offering higher performance and smaller solution size for high power density applications including DC-DC conversion, AC/DC SMPS and chargers, solar optimizers and microinverters, and motor drives.
EL SEGUNDO, Calif.— October 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (eGaN®) power FETs and ICs, expands the selection of off-the-shelf GaN FETs in thermally enhanced QFN packages with the introduction of the 150 V EPC2308 designed for motor drive in power tools and robots, high density DC-DC from/to 80 V-100 V for industrial applications, synchronous rectification to 28 V – 54 V for chargers, adaptors and power supplies, smartphones USB fast chargers, and in solar optimizers and microinverters.
Read more
Gallium nitride devices are leading the innovation in power conversion. The benefits of GaN-based inverters are becoming increasingly evident in motor drive applications.
Power Electronics News
October, 2022
Read article
Read more
As the level of automation increases in machines, detailed awareness of the surroundings becomes necessary. Time-of-flight based 3D imaging systems have become the eyes of machines. eGaN® technology has been the workhorse of laser drivers for these systems, enabling the resolution to make intelligent decisions.
Bodo’s Power Systems
October, 2022
Read article
Read more
The EPC9176 GaN-based inverter reference design enhances motor drive system performance, range, precision, torque, all while simplifying design. The extremely small size of this inverter allows integration into the motor housing resulting in the lowest EMI, highest density, and lowest weight.
EL SEGUNDO, Calif.— October, 2022 — EPC announces the availability of the EPC9176, a 3-phase BLDC motor drive inverter using the EPC23102 ePower™ Stage GaN IC with embedded gate driver function and two GaN FETs with 5.2 mΩ typical RDS(on). The EPC9176 operates from an input supply voltage between 20 V and 80 V and can deliver up to 28 Apk (20 ARMS). This voltage range and power level makes the solution ideal for a variety of 3-Phase BLDC motor drive applications with 36 V – 80 V input including eBikes, eScooters, power tools, drones, robots, DC servo, medical robots and factory automation.
Read more
In this article, different power loop layouts are analyzed with simultaneous considerations for thermal management and electric parasitics.
The results show that an improved layout can provide a significant reduction in operating temperature rise while maintaining electrical performance benefits.
EE Power
October, 2022
Read Article
Read more
The development of gallium nitride technology has ushered in a new age for power electronics. The greater bandgap, critical field, and electron mobility are the three factors that affect GaN technology the most. To concentrate on expanding motor drive applications based on GaN technology in the e-mobility, robotics, drone, and industrial automation areas, EPC has opened a new design application center close to Turin, Italy.
EE Times Europe
September, 2022
Read Article
Read more
Alex Lidow, former CEO of International Rectifier and CEO of Efficient Power Conversion, is one of the few individuals to have pioneered two revolutionary power semiconductor technologies – the silicon power MOSFET and the gallium nitride HEMT. How did he come to have these two unique opportunities?
elektroniknet.de
September, 2022
Read Article
Read more
There is a commonly held belief in the industry that GaN devices are wasted on inverters for electric motors. After all, if the performance of the system is restricted by the use of a 20KHz PWM, then there can be little benefit in using a material that gains the majority of its advantages from faster switching speeds. However, according to Marco Palma, Director of Motor Drives Systems and Applications at EPC, there are some ways that GaN can still prove effective in that role.
Power Systems Design
September, 2022
Read Article
Read more
EPC’s inverter reference design is based around a GaN chip to reduce powertrain sizes
E-mobility Engineering
September, 2022
Read Article
Read more
New Motor Drive Center of Excellence (CoE) design center in Turin, Italy, to help customers exploit the power of GaN for growing motor drive applications
EL SEGUNDO, Calif.— September, 2022 — EPC has opened a new design application center near Turin, Italy, to focus on growing motor drive applications based on GaN technology in the e-mobility, robotics, drones, and industrial automation markets. The specialist team will support customers in accelerating their design cycles and define future Integrated Circuits for power management with state-of-the art equipment to test applications from 400 W to 10’s of kW.
Read more
GaN FETs in thermally enhanced QFN packages offer higher performance and smaller solution size for high power density applications, including DC-DC conversion, AC/DC chargers, solar optimizers and microinverters, motor drives, and Class D Audio
Power Electronics News
September, 2022
Read article
Read more
Efficient Power Conversion (EPC) introduces the 100 V, 3.8 mΩ EPC2306 GaN FET, offering higher performance and smaller solution size for high power density applications including DC-DC conversion, AC/DC chargers, solar optimizers and microinverters, motor drives, and Class D Audio.
EL SEGUNDO, Calif.— September 2022 — EPC, the world’s leader in enhancement-mode gallium nitride (eGaN®) power FETs and ICs, expands the selection of off-the-shelf GaN FETs in thermally enhanced QFN packages with the introduction of the 100 V EPC2306 designed for 48 V DC-DC conversion used in high-density computing applications, in 48 V BLDC motor drives for e-mobility and robotics, and in solar optimizers and microinverters, and Class D Audio.
Read more