Delivering the power of a quarter brick in the size of an eighth brick, the EPC9149 uses eGaN^® FETs switching at 1 MHz for extreme power density to deliver 1 kW of power.

EL SEGUNDO, Calif.— May, 2021 — EPC announces the availability of the EPC9149, a 1 kW-capable 48 V input to 12 V output LLC converter that operates as a DC transformer with a conversion ratio of 4:1. This demonstration board features the 100V EPC2218 and 40 V EPC2024 GaN FETs.

The EPC9137 is a two-phase 48 V – 12 V bidirectional converter that delivers 1.5 kW with 97% efficiency in small solution size for mild-hybrid cars and battery power backup units.

EL SEGUNDO, Calif.— May, 2021 — EPC announces the availability of the EPC9137, a 1.5 kW, two-phase 48 V – 12 V bidirectional converter that operates with 97 % efficiency in a very small footprint. The design of this demonstration board is scalable; that is, two converters can be paralleled to achieve 3 kW or three converters can be paralleled to achieve 4.5 kW. The board features four EPC2206 100 V eGaN^® FETs and is controlled by a module that includes the Microchip dsPIC33CK256MP503 16-bit digital controller.

The EPC2152 ePower™ Stage enables higher performance and smaller solution size for high performance, low-cost BLDC motors as demonstrated in the EPC9146 demonstration board.

EL SEGUNDO, Calif.— May, 2021 — EPC announces the availability of the EPC9146, a 400 W motor drive demonstration. The EPC9146 power board contains three independently controlled half bridge circuits, featuring the EPC2152 monolithic ePower™ Stage with integrated gate driver, 80 V maximum device voltage, 15 A (10 A_RMS) maximum output current. The inverter board measures just 81 mm x 75 mm and achieve an efficiency of greater than 98.4% at 400 W output power.

Efficient Power Conversion (EPC) will showcase the company’s latest enhancement-mode gallium nitride-based FETs and ICs demonstrating how GaN technology’s superior performance is transforming power delivery for automotive, computing, and robotics at the PCIM Europe 2021 Digital Days.

EL SEGUNDO, Calif.— April 2021 — The EPC team will be delivering two technical presentations, an educational tutorial, an exhibitor webinar, and participating in panel discussions on gallium nitride (GaN) technology and applications at the upcoming PCIM Europe 2021 Digital Days, May 3 – 7. In addition, the company will participate in the event’s virtual exhibition, showing its latest eGaN FETs and ICs in customers’ end products that are rapidly adopting eGaN^® technology.

Efficient Power Conversion (EPC) announces that the EPC2152 ePower™ Stage IC has received the 2020 Elektra Award for Semiconductor Product of the Year (Analogue).

EL SEGUNDO, Calif.— March 2021 — EPC’s ePower™ stage, EPC2152 Integrated Circuit (IC), has been honored with an Elektra Award 2020 in the Semiconductor Product of the Year – Analogue category. The award presentation was announced on March 25^th during a virtual awards ceremony hosted by Electronics Weekly. These prestigious annual awards have been running for over 19 years to reward and recognize companies and individuals for their excellent performance, innovation, and contribution to the global electronics industry. Judging is carried out by an independently and unbiased, diverse, and knowledgeable panel of industry experts.

Efficient Power Conversion (EPC) announces the expansion of its new gallium nitride (GaN) integrated circuit (IC) product family offering higher performance and smaller solution size for time-of-flight (ToF) lidar applications including robotics, drones, 3D sensing, gaming, and autonomous cars.

EL SEGUNDO, Calif.— March 2021 — EPC announces the introduction of a laser driver that integrates a 40 V, 10 A FET with a gate driver and low-voltage differential signaling (LVDS) logic level input in a single chip for time-of-flight lidar systems used in robotics, drones, augmented reality, and gaming applications.

The ultra-fast transition EPC2034C eGaN^® FETs used on the EPC9150 enables high current pulses up to 220 A and pulse widths under 3 ns, thus allowing a lidar system to see farther, faster, and better.

EL SEGUNDO, Calif.— March 2021 — Efficient Power Conversion  (EPC) announces the availability of the EPC9150, a 200 V, high current, pulsed-laser diode driver demonstration board. In a lidar system, used to create 3-D maps for autonomous vehicle applications, speed and accuracy of object detection is critical. As demonstrated by this board, the rapid transition capability of the EPC2034C eGaN FETs provide power pulses to drive the laser diodes, VCSELs or LEDs up to ten times faster than an equivalent MOSFET and in a small fraction of the area, energy, and cost. Thus, enhancing the overall performance, including accuracy, precision, and processing speed as well as the price of a lidar system.

Efficient Power Conversion (EPC) expands AEC Q101 product family with the addition of the EPC2219, 65 V gallium nitride transistor with integrated reverse gate clamp diode optimized for high resolution lidar systems.

EL SEGUNDO, Calif.— March 2021 — EPC announces successful AEC Q101 qualification of the 65 V EPC2219 designed for lidar systems in the automotive industry and other harsh environments. 

Efficient Power Conversion (EPC) introduces the first of a new gallium nitride (GaN) integrated circuit (IC) product family offering higher performance and smaller solution size for time-of-flight (ToF) lidar applications including robotics, drones, 3D sensing, and autonomous cars.

EL SEGUNDO, Calif.— February 2021 — EPC announces the introduction of a laser driver that integrates a 40 V, 10 A FET with integrated gate driver and 3.3 logic level input in a single chip for time-of-flight lidar systems used in robotics, surveillance systems, drones, autonomous cars, and vacuum cleaners.

EPC’s ePower™ Stage EPC2152 Integrated Circuit has been selected as a finalist in the Semiconductor Product of the Year – Analogue category, in this year’s Elektra Awards.  These prestigious annual awards have been running for over 19 years to reward and recognize companies and individuals for their excellent performance, innovation and contribution to the global electronics industry.

Companies are invited to enter individual categories and must demonstrate how innovative their product is, how it addresses its intended application better than incumbent products and what additional applications or markets could be opened-up.  Judging is carried out by an independently and unbiased, diverse, and knowledgeable panel of industry experts.  Due to the current COVID restrictions the Elektra Awards ceremony this year will be held virtually on 25th March and the winners announced during the event.

The combination of the Renesas dual synchronous GaN buck controller and ultra-efficient eGaN^® FETs from EPC (Efficient Power Conversion) enables high power density and efficiency with the same BOM size and cost as silicon.

EL SEGUNDO, Calif.—  February, 2021 — EPC announces the availability of the EPC9157, a 300 W DC-DC demo board in the tiny 1/16^th brick size, measuring just 33 mm x 22.9 mm x 9mm (1.3 x 0.9 x 0.35 in). The EPC9157 demo board integrates the Renesas ISL81806 80 V dual synchronous buck controller with the latest-generation EPC2218 eGaN FETs from EPC to achieve greater than 95% efficiency for 48 V input to 12 V regulated output conversion at 25 A.  

Efficient Power Conversion (EPC) publishes Phase-12 Reliability Report adding to the extensive knowledge found in their first eleven reports. With this report, EPC demonstrates field experience of 226 billion eGaN ^® device hours and a robustness capability unmatched by silicon power devices.

EL SEGUNDO, Calif.— January 2021 — EPC announces its Phase-12 Reliability Report, documenting the strategy used to achieve a remarkable field reliability record. eGaN devices have been in volume production for more than eleven years and have demonstrated very high reliability in over 226 billion hours of operation, most of which are in vehicles, LTE base stations, and satellites, to name just a few applications with rigorous operating conditions.

The combination of MPS (Monolithic Power Systems) controllers with ultra-efficient eGaN^® FETs from EPC (Efficient Power Conversion) enable best-in-class power density of 1700 W/in³ in high efficiency, low cost LLC DC-DC Conversion

EPC introduces the 40 V, 3 milliohm EPC2055 eGaN^® FET, offering designers a device that is smaller, more efficient, and more reliable than currently available devices for high performance, space-constrained applications.

EL SEGUNDO, Calif. — December 2020 — Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, advances the performance capability of low voltage, off-the-shelf gallium nitride transistors with the introduction of the EPC2055 (3 mΩ, 40 V) eGaN FET. 

EL SEGUNDO, Calif. — December 2020 — BrightLoop Converters has greatly reduced the size, cost and improved reliability of its latest BB SP DC-DC buck converters thanks to Efficient Power Conversion Corporation’s (EPC) EPC2029 enhancement-mode gallium nitride (eGaN^®) FET transistors. By switching from silicon (Si) transistors to gallium nitride (GaN), BrightLoop was able to increase the switching frequency of their design from 200 kHz to 600 kHz, while keeping the same efficiency. This design change increased the power density of the solution by a factor of approximately two and this resulted in lower cost by enabling the implementation of a smaller enclosure.

EPC’s EPC2029 is an 80 V, 48 A eGaN^® FET featuring a 1 mm ball pitch. The wider pitch allows for placement of additional and larger vias under the device to enable high current carrying capability despite the extremely small 2.6 mm x 4.6 mm footprint.

The EPC2152 ePower™ Stage enables higher performance and smaller solution size for high power density, low-cost DC-DC conversion demonstrated in the EPC9151 power module.

EL SEGUNDO, Calif.— December, 2020 — EPC announces the availability of the EPC9151, a 300 W bidirectional DC-DC voltage regulator in the in the very small 16^th brick format which is just 33 mm x 22.9 mm (1.3 x 0.9 in). The EPC9151 power module features Microchip’s dsPIC33CK digital signal controller (DSC) with the EPC2152 ePower™ Stage integrated circuit from EPC to achieve greater than 95% efficiency in a 300 W 48 V to/from 12 V converter design.  Additional phases can be added to this scalable 2-phase design to further increase power.

Efficient Power Conversion Corporation (EPC), the world’s leader in enhancement-mode gallium nitride on silicon (eGaN^®) power FETs and ICs, has won the Contributor of the Year award of the prestigious World Electronics Achievement Awards (WEAA) 2020 for Dr. Alex Lidow, CEO and co-founder of Efficient Power Conversion.

The WEAA scheme honors products, companies and individuals that have made outstanding contributions to the innovation and development of the electronics industry worldwide. A committee comprising of ASPENCORE global senior industry analysts and online users from Asia, the US and Europe select the winners. ASPENCORE is the largest electronics industry media and SaaS group in the world featuring media titles including EE Times and EDN.

EPC introduces 170 V, 6.8 milliohm EPC2059 eGaN^® FET, offering designers a device that is smaller, more efficient, more reliable, and lower cost than currently available devices for high performance 48 V synchronous rectification.

EL SEGUNDO, Calif. — November 2019 — Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, advances the performance capability while lowering the cost of off-the-shelf gallium nitride transistors with the introduction of the EPC2059 (6.8 mΩ, 170 V) eGaN FET.  This device is the latest in a family of 100 V – 200 V solutions suitable for a wide-range of power levels and price points. They are designed to meet the increasing demands of 48 V – 56 V server and data center products as well as an array of consumer power supply applications for high end computing, including gaming PCs, LCD/LED TVs, and LED lighting.

Stefan Werkstetter appointed as New Director of Sales for EMEA to focus on assisting customers in the adoption of eGaN^® FETs and Integrated Circuits for applications including DC-DC, lidar, motor control, and other leading-edge power conversion systems

EL SEGUNDO, Calif. — November 2020 — To support the continued adoption of gallium nitride (GaN) FETs and Integrated Circuits in the European market, Efficient Power Conversion Corporation (EPC) is pleased to announce the appointment of Stefan Werkstetter as Director, Sales EMEA.

THIEF RIVER FALLS, Minnesota, USA – Digi-Key Electronics, the leading global electronic components distributor, announced that it has partnered with Efficient Power Conversion Corporation (EPC) to host a webinar on how to harness the power of eGaN FETS and ICs for motor drives. The webinar will take place on October 28 at 8 a.m. PST.

Register for the Harness the Power of GaN for Smaller, Lighter, More Precise Motor Drives webinar at EPC’s webinar page