Efficient Power Conversion (EPC) expands AEC Q101 product family with the addition of the EPC2214, 80 V gallium nitride transistor optimized for high resolution lidar systems.

EL SEGUNDO, Calif.— April 2019 — EPC announces successful AEC Q101 qualification of the 80 V EPC2214 designed for lidar systems in the automotive industry and other harsh environments. 

EPC introduces 100 V, 3.8 milliohm EPC2053 eGaN^® FET, joining the EPC2045, EPC2052, and EPC2051 to offer a comprehensive 100 V family of GaN transistors that are more efficient, smaller, and lower cost for high performance 48 V DC-DC conversion.

EL SEGUNDO, Calif. — April 2019 — Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs advances the performance capability while lowering the cost of off-the-shelf gallium nitride transistors with the introduction of the EPC2053 (3.8 mΩ, 100 V) eGaN FET.

The EPC2052 offers power systems designers a 100 V, 13.5 mΩ, power transistor capable of 74 A pulsed in an extremely small chip-scale package.  In a 48 V – 12 V DC-DC Power Converters these new generation eGaN FETs achieved greater than 97% efficiency at 500 kHz and greater than 96% Efficiency at 1 MHz

EL SEGUNDO, Calif. — March 2019 — Efficient Power Conversion (EPC) announces the EPC2052, a 100 V GaN transistor with a maximum R_DS(on) of 13.5mΩ and a 74 A pulsed output current for high efficiency power conversion in a tiny 2.25mm² footprint.

EPC will exhibit live demonstrations showing how GaN technology’s superior performance is transforming power delivery for entire industries including computing, communications, and automotive.

EL SEGUNDO, Calif. — March 2019 — The EPC team will be delivering eleven technical presentations on gallium nitride (GaN) technology and applications at APEC 2019 in Anaheim, California from March 17^th through the 21^st. In addition, the company will demonstrate its latest eGaN FETs and ICs in customers’ end products that are enabled by eGaN technology.

EPC’s Phase Ten Reliability Report adds to the growing knowledge base published in the first nine reports. With this report, EPC has stress-tested over 30,000 parts for a total of over 18 million hours without failure.  There have been no field failures in over two years despite shipping millions of parts.

EL SEGUNDO, Calif.— February 2019 — EPC announces its Phase Ten Reliability Report, documenting the test results leading to the successful completion of automotive AEC-Q101 qualification. AEC-Q101 demands the highest level of reliability standards for power FETs, requiring not only zero datasheet failures, but also low parametric drift during stress testing.  Of note is that EPC’s WLCS packaging passed all the same testing standards created for conventional packaged parts, demonstrating that the superior performance of chip-scale packaging does not compromise ruggedness or reliability.

In this conference GaN market and technology status will be addressed and its future evolution will be debated by mixing visions from designers, manufacturers, and end users.

EL SEGUNDO, Calif. — January 2019 — Efficient Power Conversion (EPC) is joining forces with Yole Développement (Yole) and SEMI to sponsor the first ever ‘GaN Con,’ an industry networking event covering the entire power GaN industry from manufacturers to end users. The theme of GaN Con is “Power GaN: From promises to possible market explosion” and is focused on the emerging GaN market and the state-of-the-art for its underlying technology.

Efficient Power Conversion (EPC) expands AEC Q101 product family with the addition of two new gallium nitride devices.

EL SEGUNDO, Calif.— January 2019 — EPC announces successful AEC Q101 qualification of two additional eGaN devices, addressing a range of applications in the automotive industry and other harsh environments.  The new products, EPC2206, and EPC2212 are both discrete transistors in wafer level chip-scale packaging (WLCS) with 80 V_DS and 100 V_DS ratings respectively.

Within the EPC hospitality suite, wirelessly powered systems for the home and GaN based, industry-leading LiDAR systems used in autonomous vehicles will be on display.

EL SEGUNDO, Calif. — December 2018 — Efficient Power Conversion (EPC) will be demonstrating the power of eGaN^® technology to enhance two game-changing consumer applications – wireless power and LiDAR for self-driving cars – at the 2018 Consumer Electronics Show (CES) in Las Vegas, January 8^th through the 11^th.

As part of its expansion to support a widening customer base for DC-DC, LiDAR, wireless power applications and beyond, Efficient Power Conversion Corporation has expanded its Asia-based team with new members who are in close proximity to customers in 21 regions throughout Asia Pacific.

EL SEGUNDO, Calif. — November 28, 2018 — To support its accelerating sales growth in Asia, Efficient Power Conversion Corporation (EPC) is proud to announce the expansion of the sales and FAE team in Asia Pacific to support its expanding customer base, maximize new business acquisition and capture new market opportunities.

Workshop on Wireless Power Transfer event features industry leaders from AirFuel Alliance, Efficient Power Conversion Corp, jjPLUS and IHS Market

Taipei, Taiwan – October 30, 2018 – There is increasing demand for medium and high-power wireless power transfer (WPT) for new applications such as 5G, notebooks, robots, machine tools and medical equipment. What will be the next killer application for wireless power?

Based on the authors' years of extensive experience, this is an authoritative overview of Wide Bandgap (WBG) device characterization.

EL SEGUNDO, Calif. – September 2018 – Efficient Power Conversion Corporation (www.epc-co.com) announces the publication by the Institution of Engineering and Technology of Characterization of Wide Bandgap Power Semiconductor Devices co-authored by EPC Senior Applications Engineer, Dr. Edward A. Jones. This textbook provides essential tools to assist researchers, advanced students, and practicing engineers in performing both static and dynamic characterization of WBG devices, particularly those based on using silicon carbide (SiC) and gallium nitride (GaN) power semiconductors. The book presents practical considerations for real applications and includes examples of applying the described methodology.

Efficient Power Conversion (EPC) has successfully completed automotive AEC Q101 qualification for EPC2202 and EPC2203 gallium nitride devices, opening a range of applications in automotive and other harsh environments.

EL SEGUNDO, Calif — September 13th, 2018 — Efficient Power Conversion Corporation’s AEC Q101-qualified EPC2202 and EPC2203 have been honored with an Electronic Products China / 21iC Media’s “Top 10 Power Products – Technology Breakthrough Award.” The award presentation was announced on September 13^th, 2018 in Beijing, China during 21iC Power Conference 2018.

The EPC2051 offers power systems designers a 100 V, 25 mΩ, power transistor capable of 37 A pulsed in an extremely small chip-scale package.  These new devices are ideal for applications such as 48V power converters, LiDAR, and LED lighting.

EL SEGUNDO, Calif. — July 2018 — Efficient Power Conversion (EPC) announces the EPC2051, a 100 V GaN transistor with a maximum R_DS(on) of 25 mΩ and a 37 A pulsed output current for high efficiency power conversion in a tiny 1.1mm² footprint.

EL SEGUNDO, Calif. — June 22, 2018 -- Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN^®) power FETs and ICs, will meet with design engineers in power management in Shanghai, China, for knowledge exchanges on solutions using a synchronous FET Class E rectifier for over 30 W highly-resonant wireless power receivers, and a kilowatt laser driver with 120 A, sub-10 nanosecond pulses in < 3 cm² using eGaN FET.

Meet EPC experts on power management at PCIM Asia Exhibition and Conference on June 26th, 2018 (Tuesday) at 10 a.m. – 10.50 a.m. at Exhibition Hall No. 2, 1/F of Shanghai World Expo Exhibition and Convention Center, 1099 Guozhan Road, Shanghai, China.

Superior characteristics of eGaN^® FETs and integrated circuits, such as low output capacitance, low input capacitance, low parasitic inductances, and small size make them ideal for increasing efficiency in highly resonant, AirFuel™ wireless power transfer systems.

EL SEGUNDO, Calif.— May 2018 — Efficient Power Conversion Corporation (EPC) today announces the availability of a complete class 4 wireless power kit, the EPC9129. The system can transmit up to 33 W while operating at 6.78 MHz (the lowest ISM band). The kit comes complete with two receivers, each with a regulated output − one capable of 5 W capable and a second capable of delivering 27 W at 19 V.

Spirit Electronics now provides distribution support to assist customers in adopting eGaN^® FETs and ICs for leading-edge power conversion systems in the defense and aerospace market.

EL SEGUNDO, Calif.— May 2018 — To support its accelerating growth in the defense and aerospace markets, Efficient Power Conversion Corporation (EPC) is proud to announce the appointment of Spirit Electronics as a distribution partner focusing on these key market segments.  Spirit Electronics, in operation since 1979 and located in Phoenix, Arizona and Irvine, California, supplies products and services to the Department of Defense, aerospace, and telecommunication industries.  

Efficient Power Conversion (EPC) will exhibit live demonstrations at PCIM Europe 2018 showing how GaN technology’s superior performance is transforming power delivery for entire industries including computing, communications, and automotive.

EL SEGUNDO, Calif. — May 2018 — The EPC team will be delivering five technical presentations on gallium nitride (GaN) technology and applications at PCIM Europe 2018 in Nuremberg, Germany from June 5^th through the 7^th. In addition, in Hall 7, Stand 539, the company will exhibit its latest eGaN^® FETs and ICs in customers’ end products that are enabled by eGaN technology.

EPC continues its 2018 GaN China Roadshow with participation in the upcoming WiPDA 2018 conference in Xian May 17^th through 18^th

EL SEGUNDO, Calif.— May 2018 — Efficient Power Conversion Corporation (EPC) started a GaN China Roadshow 2018 beginning in Shenzhen in March with technical presentations at the AirFuel Developers Forum. The second event in the roadshow was participation in SEMI China’s Power and Compound Semiconductor International Forum held in Shanghai, where Alex Lidow, CEO gave a keynote speech. Soon, from May 17 to 19, EPC will be meeting with engineers to share knowledge and demonstrations of eGaN^® devices, at WiPDA Asia IEEE workshop to be held at the Cullinan Huicheng Hotel in Xi’an.  Beyond WiPDA, the next stop for the EPC roadshow will be PCIM Asia, to be held in Shanghai, June 26^th through 28^th.  At this conference, EPC experts will be giving technical presentations on the use of GaN devices in wireless power transfer and LiDAR for autonomous cars.

Efficient Power Conversion (EPC) has successfully completed automotive AEC Q101 qualification for two gallium nitride devices.

EL SEGUNDO, Calif.— May 2018 — EPC announces successful AEC Q101 qualification of two eGaN^® devices, opening a range of applications in automotive and other harsh environments.  The products, EPC2202 and EPC2203, are both discrete transistors in wafer level chip-scale packaging (WLCS) with 80 V_DS ratings and will soon be followed with several more discrete transistors and integrated circuits designed for the harsh automotive environment. 

The EPC2050 offers power systems designers a 350 V, 65 mΩ, 26 A power transistor in an extremely small chip-scale package.  These new devices are ideal for applications such as multi-level converters, EV charging, solar power inverters, and motor drives.

EL SEGUNDO, Calif. — April 2018 — Efficient Power Conversion announces the EPC2050, a 350 V GaN transistor with a maximum R_DS(on) of 65 mΩ and a 26 A pulsed output current. Applications include EV charging, solar power inverters, motor drives, and multi-level converter configurations, such as a 3-level, 400 V input to 48 V output LLC converter for telecom or server power supplies.