El Segundo, CA – March 2025 – EPC is pleased to announce that the United States Patent Office, in a decision issued in IPR2023-01381, has strengthened the ’294 patent by adding two new patent claims that are fundamental to commercial enhancement-mode GaN devices. While the USPTO also cancelled two claims that were the basis for the ITC’s infringement decision against Innoscience, EPC will appeal the USPTO’s cancellation of its claims. Historically, EPC’s patents have been upheld in multiple jurisdictions, including both the U.S. and China, reinforcing EPC’s expectation that the final outcome will ultimately be in its favor.

El Segundo, CA — March 2025 – Efficient Power Conversion (EPC), the leader in enhancement-mode gallium nitride (GaN) power transistors and ICs, introduces the EPC2367, a next-generation 100 V eGaN® FET that delivers superior performance, higher efficiency, and lower system costs for power conversion applications.

EPC’s GaN Experts will be available during APEC, showcasing the latest generation of GaN FETs and ICs in a wide variety of applications.

EL SEGUNDO, Calif. — February 2025 — EPC, the world’s leader in enhancement-mode gallium nitride (GaN)-based power solutions, is set to highlight cutting-edge advancements in AI, robotics, and other high-density power conversion applications at the Applied Power Electronics Conference (APEC) 2025. During the event, held from March 16 to March 20 in Atlanta, GA, EPC will focus on demonstrating how GaN is revolutionizing AI infrastructure, humanoid robotics, industrial and consumer applications in booth 1231.

EL SEGUNDO, Calif.— February 2025 — Efficient Power Conversion Corporation (EPC), the world leader in enhancement-mode gallium nitride (eGaN®) power devices is pleased to announce the release of the 4th edition of its groundbreaking textbook, GaN Power Devices for Efficient Power Conversion.

This latest edition reflects the rapid advancements in GaN technology and its transformative impact across various industries, including renewable energy, electric vehicles, data centers, robotics, and space applications. Co-authored by EPC CEO Dr. Alex Lidow and a team of GaN experts, the textbook remains an indispensable resource for engineers, students, and industry innovators looking to stay at the forefront of power electronics.

The EPC91104 provides a versatile reference design, with optimized PCB layout, for wide input voltage range motor drive applications

EL SEGUNDO, Calif.— January 2025 — Efficient Power Conversion Corporation (EPC), the world leader in enhancement-mode gallium nitride (eGaN®) power devices announces the launch of the EPC91104, a high-performance 3-phase BLDC motor drive inverter reference design. This innovative design is ideal for powering compact, precision motors in humanoid robots, such as those used for wrist, finger, and toe movements.

The EPC91200 provides a versatile reference design, with optimized PCB layout, for wide input voltage range motor drive applications

EL SEGUNDO, Calif.— January 2025 — Efficient Power Conversion Corporation (EPC), the world leader in enhancement-mode gallium nitride (eGaN®) power devices introduces the EPC91200, a fully configured motor drive inverter reference design that delivers exceptional performance and flexibility for a variety of industrial and battery-powered applications.

ITC import and sales ban on Innoscience products now in effect

El Segundo, CA – January 7, 2025 – Efficient Power Conversion (EPC) today announced the conclusion of the Presidential review period for the U.S. International Trade Commission’s (ITC) final determination, affirming that Innoscience (Zhuhai) Technology Co., Ltd. and its affiliates (Innoscience) infringed EPC’s foundational patent for GaN technology. The ITC’s decision is now final, implementing an import and sales ban on Innoscience products in the United States without a license from EPC.

Enhancing Photovoltaic System Performance with Compact, Reliable, Cost-Effective GaN Technology

EL SEGUNDO, Calif.— December, 2024 — Efficient Power Conversion Corporation (EPC), the world leader in enhancement-mode gallium nitride (eGaN^®) power devices, proudly announces the launch of the EPC9178, the latest reference design for photovoltaic (PV) optimizers. Designed to deliver high reliability while addressing critical challenges in energy efficiency and cost-effectiveness through the reduction of passive components in solar energy systems, the EPC9178 demonstrates the transformative potential of GaN technology for renewable energy solutions.

The world is entering a new era of automation, where robots are becoming increasingly sophisticated, capable of performing tasks once considered the exclusive domain of humans. At the forefront of this transformation are humanoid robots, designed to mimic the form and functions of the human body.

Bodo’s Power Systems
October 2024
More details

Battery-powered applications such as new-generation robots, drones, and power tools require a reduction in space and a simplification of the design to control electric motors. Optimizing size and components results in innovative solutions that include more functions in a small space without losing efficiency and performance. EPC ePower™ Stage ICs technology helps to simplify and improve the inverter design in advanced motor control applications.

Bodo’s Power Systems
June, 2024
Read article

The first Universal Serial Bus (USB) specification, released in 1996, aimed to standardize power delivery and connectivity in computing and telecommunication industries [1]. Initially supporting a 5 V power bus with up to 5 A of current (25 W) and maximum data transfer rates of 12 Mbit/s, USB has evolved significantly due to the proliferation of electronic devices, leading to a demand for higher power capabilities.

Bodo’s Power Systems
May, 2024
Read article

EPC introduces the 50 V, 8.5 mOhm EPC2057 GaN FET in tiny 1.5 mm x 1.2 mm footprint, offering higher power density for USB-C PD applications.

EL SEGUNDO, Calif.— June 2024 — EPC, the world’s leader in enhancement-mode gallium nitride (GaN) power FETs and ICs, launches the 50 V, 8.5 mΩ EPC2057. This GaN FET is specifically designed to meet the evolving needs of high-power USB-C devices including those used in consumer electronics, in-car charging, and eMobility.

根据国家知识产权局官网20204年4月2日的消息，宜普电源转换公司（Efficient Power Conversion Corporation, EPC，以下简称宜普公司）一件名为“增强型GaN高电子迁移率晶体管器件及其制备方法”的专利(专利号ZL201080015388.2)的核心权利要求6、9、10、13、14、17、18、22-26在无效程序（案件编号：4W116775）中被维持有效。该件专利的无效请求人是英诺赛科（苏州）科技有限公司（以下简称英诺赛科公司）。

According to the information on the official website of the China National Intellectual Property Administration (CNIPA) on April 2, 2024, the key claims 6, 9, 10, 13, 14, 17, 18 and 22-26 of the Chinese patent titled “Enhancement mode GaN HEMT device and method for fabricating the same” (Patent No. ZL201080015388.2) owned by Efficient Power Conversion Corp (“EPC”) have been maintained valid during an invalidation procedure (case number: 4W116775), which was requested by the petitioner Innoscience (Suzhou) Technology Co., Ltd. (“Innoscience”).

On July 3^rd, 2023, China’s Ministry of Commerce announced it would put in place certain restrictions on the exporting of gallium and germanium, among other materials, starting in August of this year. EPC’s wafer technology is ‘GaN-on-Si’, although the amount of gallium in each device is miniscule. There are significant sources of gallium available worldwide and EPC’s needs are relatively small, we expect no short or long-term interruption of supply.

Efficient Power Conversion (EPC) publishes Phase-15 Reliability Report adding to the extensive knowledge base on GaN reliability and mission robustness.

EL SEGUNDO, Calif.— March 2023 — EPC announces the publication of its Phase-15 Reliability Report, documenting continued work using test-to-fail methodology and adding specific reliability metrics and predictions for real world applications including solar optimizers, lidar sensors, and DC-DC converters.

Efficient Power Conversion (EPC) expands its family of footprint compatible ePower™ Stage ICs to boost power density and simplify design for different power requirements in DC-DC applications, motor drives, and class-d audio amplifiers.

EL SEGUNDO, Calif.— March 2023 — EPC announces the introduction of two new 100 V power stage ICs rated at 15 A (EPC23104) and 25 A (EPC23103). The two devices join the 100 V 35 A power stage IC EPC23102 offered by EPC.

With Electronic Power Steering (EPS), the hydraulic system is replaced with an electric motor that aids the driver only when needed. Its digital assistance control can be modified online to adapt to driving conditions. There are, however, several design constraints to consider. One is that the driver does not want to lack the haptic feedback from the tires, especially when a vehicle is large, such as a truck. Other constraints are determined by safety regulations, particularly for automatic guided vehicles. These constraints require adopting an efficient, accurate and redundant system. Gallium nitride technology helps the designers in all these areas.

Power Electronics News
March, 2023
Read article

EL SEGUNDO, Calif.—  March 2023 – Efficient Power Conversion (EPC), the world’s leader in enhancement-mode gallium nitride FETs and ICs, has teamed up with SHARGE Technology (SHARGE) to design a 67 W USB PD charger with a power display screen. The Retro 67 fast charger uses EPC’s 100 V GaN FET, EPC2218, which can deliver 231 A pulsed current in a tiny footprint of 3.5 mm x 1.95 mm offering designers a significantly smaller, more efficient device than silicon MOSFET for USB PD fast chargers.

EPC2218 provides SHARGE’s All-GaN fast charger with higher efficiency, state-of-the-art power density and lower system cost.

With the increase in government mandates to combat climate change, automakers are moving quickly to leverage new technology to respond by switching from the internal combustion engine to electric-drive vehicles. This article presents the design of a 2 kW, two-phase 48 V/12 V bi-directional converter using GaN FETs that achieves 96% efficiency and is targeted for the 48 V mild hybrid system.

PSD North America
March, 2023
Read article Read more

EPC’s GaN Experts will be available during APEC, showcasing the latest generation of GaN FETs and ICs in a wide variety of real-world applications.

EL SEGUNDO, Calif. — March 2023 — EPC, the world’s leader in enhancement-mode gallium nitride FETs and ICs,will be delivering multiple technical presentations at the premier power electronics conference; the IEEE Applied Power Electronics Conference and Exposition (APEC 2023) in Orlando from March 19^th through the 23^rd (see detailed schedule below).  In addition, the company will demonstrate it’s latest generation of eGaN^® FETs and ICs in applications ranging from high-power density computing, eMobility, robotics, solar power, battery charging, and more in booth # 732 in the Orange County Convention Center.  Stop by to see the ‘Wall of GaN’ – the broadest portfolio of GaN power semiconductors in the market available for off-the-shelf delivery.